Example of Journal of Water Reuse and Desalination format
Recent searches

Example of Journal of Water Reuse and Desalination format Example of Journal of Water Reuse and Desalination format Example of Journal of Water Reuse and Desalination format Example of Journal of Water Reuse and Desalination format Example of Journal of Water Reuse and Desalination format
Sample paper formatted on SciSpace - SciSpace
This content is only for preview purposes. The original open access content can be found here.
Look Inside
Example of Journal of Water Reuse and Desalination format Example of Journal of Water Reuse and Desalination format Example of Journal of Water Reuse and Desalination format Example of Journal of Water Reuse and Desalination format Example of Journal of Water Reuse and Desalination format
Sample paper formatted on SciSpace - SciSpace
This content is only for preview purposes. The original open access content can be found here.
open access Open Access

Journal of Water Reuse and Desalination — Template for authors

Publisher: IWA Publishing
Categories Rank Trend in last 3 yrs
Water Science and Technology #58 of 225 up up by 66 ranks
Filtration and Separation #7 of 13 up up by 1 rank
journal-quality-icon Journal quality:
Good
calendar-icon Last 4 years overview: 180 Published Papers | 772 Citations
indexed-in-icon Indexed in: Scopus
last-updated-icon Last updated: 23/07/2020
Related journals
Insights
General info
Top papers
Popular templates
Get started guide
Why choose from SciSpace
FAQ

Related Journals

open access Open Access
recommended Recommended

Taylor and Francis

Quality:  
High
CiteRatio: 10.7
SJR: 1.107
SNIP: 2.128
open access Open Access

Royal Society of Chemistry

Quality:  
High
CiteRatio: 5.5
SJR: 1.08
SNIP: 1.113
open access Open Access

Frontiers Media

Quality:  
High
CiteRatio: 5.0
SJR: 1.558
SNIP: 1.437
open access Open Access

Springer

Quality:  
High
CiteRatio: 4.0
SJR: 0.881
SNIP: 0.986

Journal Performance & Insights

CiteRatio

SCImago Journal Rank (SJR)

Source Normalized Impact per Paper (SNIP)

A measure of average citations received per peer-reviewed paper published in the journal.

Measures weighted citations received by the journal. Citation weighting depends on the categories and prestige of the citing journal.

Measures actual citations received relative to citations expected for the journal's category.

4.3

54% from 2019

CiteRatio for Journal of Water Reuse and Desalination from 2016 - 2020
Year Value
2020 4.3
2019 2.8
2018 1.9
2017 1.1
2016 0.8
graph view Graph view
table view Table view

0.548

36% from 2019

SJR for Journal of Water Reuse and Desalination from 2016 - 2020
Year Value
2020 0.548
2019 0.402
2018 0.414
2017 0.291
2016 0.256
graph view Graph view
table view Table view

1.001

53% from 2019

SNIP for Journal of Water Reuse and Desalination from 2016 - 2020
Year Value
2020 1.001
2019 0.656
2018 0.561
2017 0.294
2016 0.292
graph view Graph view
table view Table view

insights Insights

  • CiteRatio of this journal has increased by 54% in last years.
  • This journal’s CiteRatio is in the top 10 percentile category.

insights Insights

  • SJR of this journal has increased by 36% in last years.
  • This journal’s SJR is in the top 10 percentile category.

insights Insights

  • SNIP of this journal has increased by 53% in last years.
  • This journal’s SNIP is in the top 10 percentile category.
Journal of Water Reuse and Desalination

Guideline source: View

All company, product and service names used in this website are for identification purposes only. All product names, trademarks and registered trademarks are property of their respective owners.

Use of these names, trademarks and brands does not imply endorsement or affiliation. Disclaimer Notice

IWA Publishing

Journal of Water Reuse and Desalination

Approved by publishing and review experts on SciSpace, this template is built as per for Journal of Water Reuse and Desalination formatting guidelines as mentioned in IWA Publishing author instructions. The current version was created on 22 Jul 2020 and has been used by 459 authors to write and format their manuscripts to this journal.

Water Science and Technology

Filtration and Separation

Environmental Science

i
Last updated on
22 Jul 2020
i
ISSN
2220-1319
i
Acceptance Rate
Not provided
i
Frequency
Not provided
i
Open Access
No
i
Sherpa RoMEO Archiving Policy
Green faq
i
Plagiarism Check
Available via Turnitin
i
Endnote Style
Download Available
i
Bibliography Name
plainnat
i
Citation Type
Author Year
(Blonder et al., 1982)
i
Bibliography Example
G E Blonder, M Tinkham, and T M Klapwijk. Transition from metallic to tunneling regimes in superconducting microconstrictions: Excess current, charge imbalance, and supercurrent conversion. Phys. Rev. B, 25(7):4515– 4532, 1982.

Top papers written in this journal

open accessOpen access Journal Article DOI: 10.2166/WRD.2016.104
Heavy metal removal from wastewater using various adsorbents: a review
Renu1, Madhu Agarwal1, Kailash Singh1

Abstract:

Heavy metals are discharged into water from various industries. They can be toxic or carcinogenic in nature and can cause severe problems for humans and aquatic ecosystems. Thus, the removal of heavy metals from wastewater is a serious problem. The adsorption process is widely used for the removal of heavy metals from wastewa... Heavy metals are discharged into water from various industries. They can be toxic or carcinogenic in nature and can cause severe problems for humans and aquatic ecosystems. Thus, the removal of heavy metals from wastewater is a serious problem. The adsorption process is widely used for the removal of heavy metals from wastewater because of its low cost, availability and eco-friendly nature. Both commercial adsorbents and bioadsorbents are used for the removal of heavy metals from wastewater, with high removal capacity. This review article aims to compile scattered information on the different adsorbents that are used for heavy metal removal and to provide information on the commercially available and natural bioadsorbents used for removal of chromium, cadmium and copper, in particular. read more read less

Topics:

Wastewater (53%)53% related to the paper
View PDF
382 Citations
open accessOpen access Journal Article DOI: 10.2166/WRD.2011.000
Direct potable reuse: a future imperative
Harold Leverenz1, George Tchobanoglous1, Takashi Asano1

Abstract:

As a result of population growth, urbanization, and climate change, public water supplies are becoming stressed, and the chances of tapping new water supplies for metropolitan areas are getting more difficult, if not impossible. As a consequence, existing water supplies must go further. One way to achieve this objective is by... As a result of population growth, urbanization, and climate change, public water supplies are becoming stressed, and the chances of tapping new water supplies for metropolitan areas are getting more difficult, if not impossible. As a consequence, existing water supplies must go further. One way to achieve this objective is by increased water reuse, particularly in supplementing municipal water supplies. Although water reuse offers many opportunities it also involves a number of problems. A significant cost for nonpotable water reuse in urban areas is associated with the need to provide separate piping and storage systems for reclaimed water. In most situations, the cost of a dual distribution system has been prohibitive and thus, has limited implementation for water reuse programs. The solution to the problem of distribution is to implement direct potable reuse (DPR) of purified water in the existing water distribution system. The purpose of this paper is to consider (a) a future in which DPR will be the norm and (b) the steps that will need to be taken to make this a reality. Following an overview, the rationale for DPR, some examples of DPR projects, technological and implementation issues, and future expectations are examined. read more read less

Topics:

Reuse (58%)58% related to the paper, Reclaimed water (53%)53% related to the paper
View PDF
155 Citations
open accessOpen access Journal Article DOI: 10.2166/WRD.2019.057
Nanotechnology for water purification: electrospun nanofibrous membrane in water and wastewater treatment
Iskander Tlili1, Tawfeeq Abdullah Alkanhal1

Abstract:

\n The need for beneficial innovations in filtration expertise has lead to little consideration of cutting-edge materials, such as nanofiber membranes for water distillation. The presence of organic matter and traces of organics accumulation in wastewater poses a major problem and current technologies such as coagulation/floc... \n The need for beneficial innovations in filtration expertise has lead to little consideration of cutting-edge materials, such as nanofiber membranes for water distillation. The presence of organic matter and traces of organics accumulation in wastewater poses a major problem and current technologies such as coagulation/flocculation and chlorine technology are unable to yield satisfying results. The extra volume of sludge generated by these technologies needs further processing and disposal. Nanotechnology has outstanding potential for filtration applications due to its capability to create precise structural controlled materials for such requirements. Electrospun nanofibrous membranes (ENMs) are cutting edge membrane technology that offer substantial high flux and high rejection rates compared to conventional membranes. ENMs present a revolution in water and sewage purification by offering a lightweight, cost-effective, and lower energy consumption process compared with conventional membranes. ENMs possess high porosity, generally approximately 80%, while conventional membranes have 5–35% porosity. Nano-engineered membranes have great potential in water treatment due to their exotic properties. In this connection, electrospinning membranes are emerging as a versatile technique with promising features for water treatment. This work highlights the application of ENM in wastewater treatment and surface modification of nanomembranes in order to address fouling issues and wastewater treatment from Tabuk Sewage Treatment Plant, Saudi Arabia. read more read less

Topics:

Portable water purification (52%)52% related to the paper
97 Citations
Journal Article DOI: 10.2166/WRD.2014.058
Carbon footprint of water reuse and desalination: a review of greenhouse gas emissions and estimation tools
Pablo K. Cornejo1, Mark V. E. Santana1, David R. Hokanson, James R. Mihelcic1, Qiong Zhang1

Abstract:

As population and water demand increase, there is a growing need for alternative water supplies from water reuse and desalination systems. These systems are beneficial to water augmentation; however, there are concerns related to their carbon footprint. This study compiles the reported carbon footprint of these systems from e... As population and water demand increase, there is a growing need for alternative water supplies from water reuse and desalination systems. These systems are beneficial to water augmentation; however, there are concerns related to their carbon footprint. This study compiles the reported carbon footprint of these systems from existing literature, recognizes general trends of carbon footprint of water reuse and desalination, and identifies challenges associated with comparing the carbon footprint. Furthermore, limitations, challenges, knowledge gaps, and recommendations associated with carbon footprint estimation tools are presented. Reverse osmosis (RO) technologies were found to have lower CO 2 emissions than thermal desalination technologies and the estimated carbon footprint of seawater RO desalination (0.4–6.7 kg CO 2 eq/m 3 ) is generally larger than brackish water RO desalination (0.4–2.5 kg CO 2 eq/m 3 ) and water reuse systems (0.1–2.4 kg CO 2 eq/m 3 ). The large range of reported values is due to variability in location, technologies, life cycle stages, parameters considered and estimation tools, which were identified as major challenges to making accurate comparisons. Carbon footprint estimation tools could be improved by separating emissions by unit process, direct and indirect emissions, and considering the offset potential of various resource recovery strategies. read more read less

Topics:

Carbon footprint (68%)68% related to the paper, Desalination (62%)62% related to the paper, Low-temperature thermal desalination (62%)62% related to the paper, Greenhouse gas (55%)55% related to the paper, Population (51%)51% related to the paper
90 Citations
open accessOpen access Journal Article DOI: 10.2166/WRD.2018.070
Current status of reclaimed water in China: An overview
Zhongfan Zhu1, Jie Dou2

Abstract:

This paper presents the objectives of reclaimed water use in China and the current quantities used at the national and provincial levels Using 2015 statistical data as an example, this paper studies the influences of water resources quantity, gross domestic product and policy promotion hierarchy on reclaimed water use in all ... This paper presents the objectives of reclaimed water use in China and the current quantities used at the national and provincial levels Using 2015 statistical data as an example, this paper studies the influences of water resources quantity, gross domestic product and policy promotion hierarchy on reclaimed water use in all provincial administrative regions in China Reclaimed water use in Beijing and Jiangsu are presented as two representative examples China9s reclaimed water experience can provide some guidance for other countries facing similar water resource situations read more read less

Topics:

Reclaimed water (59%)59% related to the paper, Water resources (58%)58% related to the paper, Beijing (51%)51% related to the paper, Resource (biology) (51%)51% related to the paper
View PDF
67 Citations
Author Pic

SciSpace is a very innovative solution to the formatting problem and existing providers, such as Mendeley or Word did not really evolve in recent years.

- Andreas Frutiger, Researcher, ETH Zurich, Institute for Biomedical Engineering

Get MS-Word and LaTeX output to any Journal within seconds
1
Choose a template
Select a template from a library of 40,000+ templates
2
Import a MS-Word file or start fresh
It takes only few seconds to import
3
View and edit your final output
SciSpace will automatically format your output to meet journal guidelines
4
Submit directly or Download
Submit to journal directly or Download in PDF, MS Word or LaTeX

(Before submission check for plagiarism via Turnitin)

clock Less than 3 minutes

What to expect from SciSpace?

Speed and accuracy over MS Word

''

With SciSpace, you do not need a word template for Journal of Water Reuse and Desalination.

It automatically formats your research paper to IWA Publishing formatting guidelines and citation style.

You can download a submission ready research paper in pdf, LaTeX and docx formats.

Time comparison

Time taken to format a paper and Compliance with guidelines

Plagiarism Reports via Turnitin

SciSpace has partnered with Turnitin, the leading provider of Plagiarism Check software.

Using this service, researchers can compare submissions against more than 170 million scholarly articles, a database of 70+ billion current and archived web pages. How Turnitin Integration works?

Turnitin Stats
Publisher Logos

Freedom from formatting guidelines

One editor, 100K journal formats – world's largest collection of journal templates

With such a huge verified library, what you need is already there.

publisher-logos

Easy support from all your favorite tools

Journal of Water Reuse and Desalination format uses plainnat citation style.

Automatically format and order your citations and bibliography in a click.

SciSpace allows imports from all reference managers like Mendeley, Zotero, Endnote, Google Scholar etc.

Frequently asked questions

1. Can I write Journal of Water Reuse and Desalination in LaTeX?

Absolutely not! Our tool has been designed to help you focus on writing. You can write your entire paper as per the Journal of Water Reuse and Desalination guidelines and auto format it.

2. Do you follow the Journal of Water Reuse and Desalination guidelines?

Yes, the template is compliant with the Journal of Water Reuse and Desalination guidelines. Our experts at SciSpace ensure that. If there are any changes to the journal's guidelines, we'll change our algorithm accordingly.

3. Can I cite my article in multiple styles in Journal of Water Reuse and Desalination?

Of course! We support all the top citation styles, such as APA style, MLA style, Vancouver style, Harvard style, and Chicago style. For example, when you write your paper and hit autoformat, our system will automatically update your article as per the Journal of Water Reuse and Desalination citation style.

4. Can I use the Journal of Water Reuse and Desalination templates for free?

Sign up for our free trial, and you'll be able to use all our features for seven days. You'll see how helpful they are and how inexpensive they are compared to other options, Especially for Journal of Water Reuse and Desalination.

5. Can I use a manuscript in Journal of Water Reuse and Desalination that I have written in MS Word?

Yes. You can choose the right template, copy-paste the contents from the word document, and click on auto-format. Once you're done, you'll have a publish-ready paper Journal of Water Reuse and Desalination that you can download at the end.

6. How long does it usually take you to format my papers in Journal of Water Reuse and Desalination?

It only takes a matter of seconds to edit your manuscript. Besides that, our intuitive editor saves you from writing and formatting it in Journal of Water Reuse and Desalination.

7. Where can I find the template for the Journal of Water Reuse and Desalination?

It is possible to find the Word template for any journal on Google. However, why use a template when you can write your entire manuscript on SciSpace , auto format it as per Journal of Water Reuse and Desalination's guidelines and download the same in Word, PDF and LaTeX formats? Give us a try!.

8. Can I reformat my paper to fit the Journal of Water Reuse and Desalination's guidelines?

Of course! You can do this using our intuitive editor. It's very easy. If you need help, our support team is always ready to assist you.

9. Journal of Water Reuse and Desalination an online tool or is there a desktop version?

SciSpace's Journal of Water Reuse and Desalination is currently available as an online tool. We're developing a desktop version, too. You can request (or upvote) any features that you think would be helpful for you and other researchers in the "feature request" section of your account once you've signed up with us.

10. I cannot find my template in your gallery. Can you create it for me like Journal of Water Reuse and Desalination?

Sure. You can request any template and we'll have it setup within a few days. You can find the request box in Journal Gallery on the right side bar under the heading, "Couldn't find the format you were looking for like Journal of Water Reuse and Desalination?”

11. What is the output that I would get after using Journal of Water Reuse and Desalination?

After writing your paper autoformatting in Journal of Water Reuse and Desalination, you can download it in multiple formats, viz., PDF, Docx, and LaTeX.

12. Is Journal of Water Reuse and Desalination's impact factor high enough that I should try publishing my article there?

To be honest, the answer is no. The impact factor is one of the many elements that determine the quality of a journal. Few of these factors include review board, rejection rates, frequency of inclusion in indexes, and Eigenfactor. You need to assess all these factors before you make your final call.

13. What is Sherpa RoMEO Archiving Policy for Journal of Water Reuse and Desalination?

SHERPA/RoMEO Database

We extracted this data from Sherpa Romeo to help researchers understand the access level of this journal in accordance with the Sherpa Romeo Archiving Policy for Journal of Water Reuse and Desalination. The table below indicates the level of access a journal has as per Sherpa Romeo's archiving policy.

RoMEO Colour Archiving policy
Green Can archive pre-print and post-print or publisher's version/PDF
Blue Can archive post-print (ie final draft post-refereeing) or publisher's version/PDF
Yellow Can archive pre-print (ie pre-refereeing)
White Archiving not formally supported
FYI:
  1. Pre-prints as being the version of the paper before peer review and
  2. Post-prints as being the version of the paper after peer-review, with revisions having been made.

14. What are the most common citation types In Journal of Water Reuse and Desalination?

The 5 most common citation types in order of usage for Journal of Water Reuse and Desalination are:.

S. No. Citation Style Type
1. Author Year
2. Numbered
3. Numbered (Superscripted)
4. Author Year (Cited Pages)
5. Footnote

15. How do I submit my article to the Journal of Water Reuse and Desalination?

It is possible to find the Word template for any journal on Google. However, why use a template when you can write your entire manuscript on SciSpace , auto format it as per Journal of Water Reuse and Desalination's guidelines and download the same in Word, PDF and LaTeX formats? Give us a try!.

16. Can I download Journal of Water Reuse and Desalination in Endnote format?

Yes, SciSpace provides this functionality. After signing up, you would need to import your existing references from Word or Bib file to SciSpace. Then SciSpace would allow you to download your references in Journal of Water Reuse and Desalination Endnote style according to Elsevier guidelines.

Fast and reliable,
built for complaince.

Instant formatting to 100% publisher guidelines on - SciSpace.

Available only on desktops 🖥

No word template required

Typset automatically formats your research paper to Journal of Water Reuse and Desalination formatting guidelines and citation style.

Verifed journal formats

One editor, 100K journal formats.
With the largest collection of verified journal formats, what you need is already there.

Trusted by academicians

I spent hours with MS word for reformatting. It was frustrating - plain and simple. With SciSpace, I can draft my manuscripts and once it is finished I can just submit. In case, I have to submit to another journal it is really just a button click instead of an afternoon of reformatting.

Andreas Frutiger
Researcher & Ex MS Word user
Use this template