Responsive polymer materials can adapt to surrounding environments, regulate transport of ions and molecules, change wettability and adhesion of different species on external stimuli, or convert chemical and biochemical signals into optical, electrical, thermal and mechanical signals, and vice versa. These materials are playing an increasingly important part in a diverse range of applications, such as drug delivery, diagnostics, tissue engineering and 'smart' optical systems, as well as biosensors, microelectromechanical systems, coatings and textiles. We review recent advances and challenges in the developments towards applications of stimuli-responsive polymeric materials that are self-assembled from nanostructured building blocks. We also provide a critical outline of emerging developments.

Emerging applications of stimuli-responsive polymer materials

Block copolymer (BCP) self-assembly has attracted considerable attention for many decades because it can yield ordered structures in a wide range of morphologies, including spheres, cylinders, bicontinuous structures, lamellae, vesicles, and many other complex or hierarchical assemblies. These aggregates provide potential or practical applications in many fields. The present tutorial review introduces the primary principles of BCP self-assembly in bulk and in solution, by describing experiments, theories, accessible morphologies and morphological transitions, factors affecting the morphology, thermodynamics and kinetics, among others. As one specific example at a more advanced level, BCP vesicles (polymersomes) and their potential applications are discussed in some detail.

/pdf/self-assembly-of-block-copolymers-381hzqnmce.pdf

Self-assembly of block copolymers

The ability of amphiphilic block copolymers to self-assemble in selective solvents has been widely studied in academia and utilized for various commercial products. The self-assembled polymer vesicle is at the forefront of this nanotechnological revolution with seemingly endless possible uses, ranging from biomedical to nanometer-scale enzymatic reactors. This review is focused on the inherent advantages in using polymer vesicles over their small molecule lipid counterparts and the potential applications in biology for both drug delivery and synthetic cellular reactors.

https://onlinelibrary.wiley.com/doi/pdf/10.1002/marc.200800713

Self-Assembled Block Copolymer Aggregates: From Micelles to Vesicles and their Biological Applications.

A mean-field phase diagram for conformationally symmetric diblock melts using the standard Gaussian polymer model is presented. Our calculation, which traverses the weak- to strong-segregation regimes, is free of traditional approximations. Regions of stability are determined for disordered (DIS) melts and for ordered structures including lamellae (L), hexagonally packed cylinders (H), body-centered cubic spheres (QIm3m), close-packed spheres (CPS), and the bicontinuous cubic network with Ia3d symmetry (QIa3d). The CPS phase exists in narrow regions along the order−disorder transition for χN ≥ 17.67. Results suggest that the QIa3d phase is not stable above χN ∼ 60. Along the L/QIa3d phase boundaries, a hexagonally perforated lamellar (HPL) phase is found to be nearly stable. Our results for the bicontinuous Pn3m cubic (QPn3m) phase, known as the OBDD, indicate that it is an unstable structure in diblock melts. Earlier approximation schemes used to examine mean-field behavior are reviewed, and compa...

Unifying Weak- and Strong-Segregation Block Copolymer Theories

A living radical polymerization (LRP) is a free radical polymerization that aims at displaying living character, (i.e., does not terminate or transfer and is able to continue polymerization once the initial feed is exhausted by addition of more monomer). However, termination reactions are inherent to a radical process, and modern LRP techniques seek to minimize such reactions, therefore providing control over the molecular weight and the molecular weight distribution of a polymeric material. In addition, the better LRP techniques incorporate many of the desirable features of traditional free radical polymerization, such as compatibility with a wide range of monomers, tolerance of many functionalities, and facile reaction conditions. The control of molecular weight and molecular weight distribution has enabled access to complex architectures and site specific functionality that were previously impossible to achieve via traditional free radical polymerizations. These LRPs are classified in three different subgroups: (1) stable free-radical polymerization such as nitroxide mediated polymerization (NMP),1,2 (2) degenerative transfer polymerization, such as iodine transfer polymerization (ITP and RITP),3,4 single electron transfer-degenerative transfer living radical polymerization(SET-DTLRP),5,6reversibleaddition-fragmentation chain transfer (RAFT),7,8 and macromolecular design via the interchange of xanthates (MADIX)9,10 polymerization, and (3) metal mediated catalyzed polymerization, such as atom transfer radical polymerization (ATRP),11-14 single electron transfer-living radical polymerization (SET-LRP),15 and organotellurium mediated living radical polymrization16-19 Among the existing LRP techniques, RAFT and MADIX are probably the most versatile processes, as they are tolerant * E-mail: T.P.D., T.Davis@UNSW.edu.au; S.P., S.Perrier@ chem.usyd.edu.au. † Centre for Advanced Macromolecular Design (CAMD), School of Chemical Sciences & Engineering, UNSW. ‡ Centre for Advanced Macromolecular Design (CAMD), School of Biotechnology & Biomolecular Sciences, UNSW. § The University of Sydney. Chem. Rev. 2009, 109, 5402–5436 5402

Bioapplications of RAFT polymerization.

Amphiphilic diblock copolymers composed of two covalently linked, chemically distinct chains can be considered to be biological mimics of cell membrane-forming lipid molecules, but with typically more than an order of magnitude increase in molecular weight. These macromolecular amphiphiles are known to form a wide range of nanostructures (spheres, worms, vesicles, etc.) in solvents that are selective for one of the blocks. However, such self-assembly is usually limited to dilute copolymer solutions (<1%), which is a significant disadvantage for potential commercial applications such as drug delivery and coatings. In principle, this problem can be circumvented by polymerization-induced block copolymer self-assembly. Here we detail the synthesis and subsequent in situ self-assembly of amphiphilic AB diblock copolymers in a one pot concentrated aqueous dispersion polymerization formulation. We show that spherical micelles, wormlike micelles, and vesicles can be predictably and efficiently obtained (within 2 ...

Mechanistic Insights for Block Copolymer Morphologies: How Do Worms Form Vesicles?

Reversible addition–fragmentation chain transfer polymerization has been utilized to polymerize 2-hydroxypropyl methacrylate (HPMA) using a water-soluble macromolecular chain transfer agent based on poly(2-(methacryloyloxy)ethylphosphorylcholine) (PMPC). A detailed phase diagram has been elucidated for this aqueous dispersion polymerization formulation that reliably predicts the precise block compositions associated with well-defined particle morphologies (i.e., pure phases). Unlike the ad hoc approaches described in the literature, this strategy enables the facile, efficient, and reproducible preparation of diblock copolymer spheres, worms, or vesicles directly in concentrated aqueous solution. Chain extension of the highly hydrated zwitterionic PMPC block with HPMA in water at 70 °C produces a hydrophobic poly(2-hydroxypropyl methacrylate) (PHPMA) block, which drives in situ self-assembly to form well-defined diblock copolymer spheres, worms, or vesicles. The final particle morphology obtained at full m...

Aqueous dispersion polymerization: a new paradigm for in situ block copolymer self-assembly in concentrated solution.

Polymerization-induced self-assembly (PISA) of poly(glycerol monomethacrylate)–poly(2-hydroxypropyl methacrylate) (PGMA–PHPMA) diblocks is conducted using a RAFT aqueous dispersion polymerization formulation at 70 °C. Several PGMA macromolecular chain transfer agents (macro-CTAs) are chain-extended using a water-miscible monomer (HPMA): the growing PHPMA block becomes increasingly hydrophobic and hence drives in situ self-assembly. The final copolymer morphology in such PISA syntheses depends on just three parameters: the mean degree of polymerization (DP) of the PGMA stabilizer block, the mean DP of the PHPMA core-forming block, and the total solids concentration. Transmission electron microscopy is used to construct detailed diblock copolymer phase diagrams for PGMA DPs of 47, 78, and 112. For the shortest stabilizer block, there is essentially no concentration dependence: spheres, worms, or vesicles can be obtained even at 10% w/w solids simply by selecting the DP of the PHPMA block that gives the appr...

Predictive Phase Diagrams for RAFT Aqueous Dispersion Polymerization: Effect of Block Copolymer Composition, Molecular Weight, and Copolymer Concentration

Biocompatible hydrogels have many applications, ranging from contact lenses to tissue engineering scaffolds. In most cases, rigorous sterilization is essential. Herein we show that a biocompatible diblock copolymer forms wormlike micelles via polymerization-induced self-assembly in aqueous solution. At a copolymer concentration of 10.0 w/w %, interworm entanglements lead to the formation of a free-standing physical hydrogel at 21 °C. Gel dissolution occurs on cooling to 4 °C due to an unusual worm-to-sphere order–order transition, as confirmed by rheology, electron microscopy, variable temperature 1H NMR spectroscopy, and scattering studies. Moreover, this thermo-reversible behavior allows the facile preparation of sterile gels, since ultrafiltration of the diblock copolymer nanoparticles in their low-viscosity spherical form at 4 °C efficiently removes micrometer-sized bacteria; regelation occurs at 21 °C as the copolymer chains regain their wormlike morphology. Biocompatibility tests indicate good cell ...

Adam Blanazs

Papers

Self-Assembled Block Copolymer Aggregates: From Micelles to Vesicles and their Biological Applications.

Mechanistic Insights for Block Copolymer Morphologies: How Do Worms Form Vesicles?

Aqueous dispersion polymerization: a new paradigm for in situ block copolymer self-assembly in concentrated solution.

Predictive Phase Diagrams for RAFT Aqueous Dispersion Polymerization: Effect of Block Copolymer Composition, Molecular Weight, and Copolymer Concentration

Sterilizable Gels from Thermoresponsive Block Copolymer Worms