V.F.C. and A.F. contributed equally to this work. The authors thank the FCT—Fundacao para a Ciencia e Tecnologia—for financial support under framework of the Strategic Funding UID/FIS/04650/2013, project PTDC/ EEI-SII/5582/2014 and project UID/EEA/04436/2013 by FEDER funds through the COMPETE 2020—Programa Operacional Competitividade e Internacionalizacao (POCI). Funds provided by FCT in the framework of EuroNanoMed 2016 call, Project LungChek ENMed/0049/2016 are also gratefully acknowledged. V.F.C., A.F., C.R., and P.M. also thank the FCT for the grants SFRH/BPD/98109/2013, SFRH/BPD/104204/2014, SFRH/ BPD/90870/2012 and SFRH/BPD/96227/2013, respectively. Finally, the authors acknowledge funding by the Spanish Ministry of Economy and Competitiveness (MINECO) through the project MAT2016-76039C4-3-R (AEI/FEDER, UE) and from the Basque Government Industry Department under the ELKARTEK program.

Advances in Magnetic Nanoparticles for Biomedical Applications.

Conventional epoxy polymers are constructed by petro-based resources that are toxic and nonrenewable, and their permanent cross-links make them difficult to be reprocessed, reshaped, and recycled. In this study, a unique eugenol-derived epoxy (Eu-EP) is synthesized, and then vitrimeric materials are prepared by reacting Eu-EP with succinic anhydride (SA) at various ratios (1:0.5, 1:0.75, and 1:1) in the presence of zinc-containing catalysts. All vitrimers exhibit excellent shape changing, crack healing, and shape memory properties. Although vitrimers with 1:0.75 and 1:1 ratios cannot be physically reprocessed, they can be well reprocessed by the chemical method of being simply decomposed in a benign ethanol solution without loading additional catalyst. The collected decomposed polymers can form vitrimers again after exposure at 190 °C for 3 h. This work combines the concepts of vitrimer preparation, chemical recycling, and biobased polymer together, which would bring a feasible way to satisfy the demands ...

Eugenol-Derived Biobased Epoxy: Shape Memory, Repairing, and Recyclability

In this study, three-dimensional (3D) magnetic Fe3O4 nanoparticles containing mesoporous bioactive glass/polycaprolactone (Fe3O4/MBG/PCL) composite scaffolds have been fabricated by the 3D-printing technique. The physiochemical properties, in vitro bioactivity, anticancer drug delivery, mechanical strength, magnetic heating ability and cell response of Fe3O4/MBG/PCL scaffolds were systematically investigated. The results showed that Fe3O4/MBG/PCL scaffolds had uniform macropores of 400 μm, high porosity of 60% and excellent compressive strength of 13–16 MPa. The incorporation of magnetic Fe3O4 nanoparticles into MBG/PCL scaffolds did not influence their apatite mineralization ability but endowed excellent magnetic heating ability and significantly stimulated proliferation, alkaline phosphatase (ALP) activity, osteogenesis-related gene expression (RUNX2, OCN, BSP, BMP-2 and Col-1) and extra-cellular matrix (ECM) mineralization of human bone marrow-derived mesenchymal stem cells (h-BMSCs). Moreover, using doxorubicin (DOX) as a model anticancer drug, Fe3O4/MBG/PCL scaffolds exhibited a sustained drug release for use in local drug delivery therapy. Therefore, the 3D-printed Fe3O4/MBG/PCL scaffolds showed the potential multifunctionality of enhanced osteogenic activity, local anticancer drug delivery and magnetic hyperthermia.

3D-printed magnetic Fe3O4/MBG/PCL composite scaffolds with multifunctionality of bone regeneration, local anticancer drug delivery and hyperthermia

To date, all epoxy vitrimer systems reported in the literature rely on addition of significant amounts of catalysts to achieve the dynamic transesterification reaction (TER). However, the catalysts used in vitrimers are often toxic and have poor miscibility with organic compounds, and they may further comprise the application performance like corrosion resistance. Moreover, the reprocessing and recycling properties are highly dependent on the loading amount and the type of catalyst. In this study, two hyperbranched epoxy (HBE) prepolymers are synthesized and then reacted with succinic anhydride to prepare a catalyst-free epoxy vitrimer system. It is demonstrated that both the curing during the preparation of the cross-linked materials and the TER in the resulting cross-linked materials proceed properly without addition of external catalyst. We attributed this phenomenon to the abundant free hydroxyl groups in HBE which serve as both reacting moiety and catalyst in both curing and the TER processes. At ele...

A Catalyst-Free Epoxy Vitrimer System Based on Multifunctional Hyperbranched Polymer

Chitosan based nanofibers in bone tissue engineering.

Synthesis of Fe3O4 Nanoparticles and their Magnetic Properties

In recent years, interest in magnetic biomimetic scaffolds for tissue engineering has increased considerably. The aim of this study is to develop magnetic biodegradable fibrous materials with potential use in bone regeneration. Magnetic biodegradable Fe(3)O(4)/chitosan (CS)/poly vinyl alcohol (PVA) nanofibrous membranes were achieved by electrospinning with average fiber diameters ranging from 230 to 380 nm and porosity of 83.9-85.1%. The influences of polymer concentration, applied voltage and Fe(3)O(4) nanoparticles loading on the fabrication of nanofibers were investigated. The polymer concentration of 4.5 wt%, applied voltage of 20 kV and Fe(3)O(4) nanoparticles loading of lower than 5 wt% could produce homogeneous, smooth and continuous Fe(3)O(4)/CS/PVA nanofibrous membranes. X-ray diffraction (XRD) data confirmed that the crystalline structure of the Fe(3)O(4), CS and PVA were maintained during electrospinning process. Fourier transform infrared spectroscopy (FT-IR) demonstrated that the Fe(3)O(4) loading up to 5 wt% did not change the functional groups of CS/PVA greatly. Transmission electron microscopy (TEM) showed islets of Fe(3)O(4) nanoparticles evenly distributed in the fibers. Weak ferrimagnetic behaviors of membranes were revealed by vibrating sample magnetometer (VSM) test. Tensile test exhibited Young's modulus of membranes that were gradually enhanced with the increase of Fe(3)O(4) nanoparticles loading, while ultimate tensile stress and ultimate strain were slightly reduced by Fe(3)O(4) nanoparticles loading of 5%. Additionally, MG63 human osteoblast-like cells were seeded on the magnetic nanofibrous membranes to evaluate their bone biocompatibility. Cell growth dynamics according to MTT assay and scanning electron microscopy (SEM) observation exhibited good cell adhesion and proliferation, suggesting that this magnetic biodegradable Fe(3)O(4)/CS/PVA nanofibrous membranes can be one of promising biomaterials for facilitation of osteogenesis.

https://iopscience.iop.org/article/10.1088/1748-6041/6/5/055008/pdf

Magnetic biodegradable Fe3O4/CS/PVA nanofibrous membranes for bone regeneration

The solid electrolyte interphase (SEI) dictates the cycling stability of lithium-metal batteries. Here, direct atomic imaging of the SEI's phase components and their spatial arrangement is achieved, using ultralow-dosage cryogenic transmission electron microscopy. The results show that, surprisingly, a lot of the deposited Li metal has amorphous atomic structure, likely due to carbon and oxygen impurities, and that crystalline lithium carbonate is not stable and readily decomposes when contacting the lithium metal. Lithium carbonate distributed in the outer SEI also continuously reacts with the electrolyte to produce gas, resulting in a dynamically evolving and porous SEI. Sulfur-containing additives cause the SEI to preferentially generate Li2 SO4 and overlithiated lithium sulfate and lithium oxide, which encapsulate lithium carbonate in the middle, limiting SEI thickening and enhancing battery life by a factor of ten. The spatial mapping of the SEI gradient amorphous (polymeric → inorganic → metallic) and crystalline phase components provides guidance for designing electrolyte additives.

Poor Stability of Li 2 CO 3 in the Solid Electrolyte Interphase of a Lithium-Metal Anode Revealed by Cryo-Electron Microscopy.

Defect Engineering in Lead Zirconate Titanate Ferroelectric Ceramic for Enhanced Electromechanical Transducer Efficiency

Dental materials often cause bacterial adhesion and promote bacterial biofilm formation, which brings a series of long-standing and significant problems in oral health. However, the current development of antibacterial research in dental devices is limited by the lack of materials endowed with good antibacterial properties against oral bacteria. Here, we present a new strategy for reducing the initial adhesion of bacterial on dental biomaterials by chemically bonding long-chain polyethylene glycol. Our work represents an important step toward solving the problem of bacterial accumulation on dental devices.

Bing Han

Papers

Synthesis of Fe3O4 Nanoparticles and their Magnetic Properties

Magnetic biodegradable Fe3O4/CS/PVA nanofibrous membranes for bone regeneration

Poor Stability of Li 2 CO 3 in the Solid Electrolyte Interphase of a Lithium-Metal Anode Revealed by Cryo-Electron Microscopy.

Defect Engineering in Lead Zirconate Titanate Ferroelectric Ceramic for Enhanced Electromechanical Transducer Efficiency

Antibacterial Property of a Polyethylene Glycol-Grafted Dental Material