Learn the basic properties and designs of modern VLSI devices, as well as the factors affecting performance, with this thoroughly updated second edition. The first edition has been widely adopted as a standard textbook in microelectronics in many major US universities and worldwide. The internationally-renowned authors highlight the intricate interdependencies and subtle tradeoffs between various practically important device parameters, and also provide an in-depth discussion of device scaling and scaling limits of CMOS and bipolar devices. Equations and parameters provided are checked continuously against the reality of silicon data, making the book equally useful in practical transistor design and in the classroom. Every chapter has been updated to include the latest developments, such as MOSFET scale length theory, high-field transport model, and SiGe-base bipolar devices.

/pdf/fundamentals-of-modern-vlsi-devices-471xd7l9pf.pdf

Fundamentals of Modern VLSI Devices

This paper mainly focuses on the development of the NOR flash memory technology, with the aim of describing both the basic functionality of the memory cell used so far and the main cell architecture consolidated today. The NOR cell is basically a floating-gate MOS transistor, programmed by channel hot electron and erased by Fowler-Nordheim tunneling. The main reliability issues, such as charge retention and endurance, are discussed, together with an understanding of the basic physical mechanisms responsible. Most of these considerations are also valid for the NAND cell, since it is based on the same concept of floating-gate MOS transistor. Furthermore, an insight into the multilevel approach, where two bits are stored in the same cell, is presented. In fact, the exploitation of the multilevel approach at each technology node allows an increase of the memory efficiency, almost doubling the density at the same chip size, enlarging the application range and reducing the cost per bit. Finally, NOR flash cell scaling issues are covered, pointing out the main challenges. Flash cell scaling has been demonstrated to be really possible and to be able to follow Moore's law down to the 130-nm technology generations. Technology development and consolidated know-how is expected to sustain the scaling trend down to 90- and 65-nm technology nodes. One of the crucial issues to be solved to allow cell scaling below the 65-nm node is the tunnel oxide thickness reduction, as tunnel thinning is limited by intrinsic and extrinsic mechanisms.

Introduction to flash memory

A flash non-volatile memory system that normally operates its memory cells in multiple storage states is provided with the ability to operate some selected or all of its memory cell blocks in two states instead. The two states are selected to be the furthest separated of the multiple states, thereby providing an increased margin during two state operation. This allows faster programming and a longer operational life of the memory cells being operated in two states when it is more desirable to have these advantages than the increased density of data storage that multi-state operation provides.

Selective operation of a multi-state non-volatile memory system in a binary mode

This paper describes the design principles and fabrication process of metal nanocrystal memories. The advantages of metal nanocrystals over their semiconductor counterparts include higher density of states, stronger coupling with the channel, better size scalability, and the design freedom of engineering the work functions to optimize device characteristics. One-dimensional (1-D) analyses are provided to illustrate the concept of work function engineering, both in direct-tunneling and F-N-tunneling regimes. A self-assembled nanocrystal formation process by rapid thermal annealing of ultrathin metal film deposited on top of gate oxide is developed and integrated with NMOSFET to fabricate such devices.

Metal nanocrystal memories. I. Device design and fabrication

Functional organic field-effect transistors (OFETs) have attracted increasing attention in the past few years due to their wide variety of potential applications. Research on functional OFETs underpins future advances in organic electronics. In this review, different types of functional OFETs including organic phototransistors, organic memory FETs, organic light emitting FETs, sensors based on OFETs and other functional OFETs are introduced. In order to provide a comprehensive overview of this field, the history, current status of research, main challenges and prospects for functional OFETs are all discussed.

Functional organic field-effect transistors.

This paper presents a novel flash memory cell based on localized charge trapping in a dielectric layer and on a new read operation. It is based on the storage of a nominal /spl sim/400 electrons above a n/sup +//p junction. Programming is performed by channel hot electron injection and erase by tunneling enhanced hot hole injection. The new read methodology is very sensitive to the location of trapped charge above the source. This single device cell has a two physical bit storage capability. The cell shows improved erase performances, no over erase and erratic bit issues, very good retention at 250/spl deg/C, and endurance up to 1M cycles. Only four masks are added to a standard CMOS process to implement a virtual ground array. In a typical 0.35 /spl mu/m process, the area of a bit is 0.315 /spl mu/m/sup 2/ and 0.188 /spl mu/m/sup 2/ in 0.25 /spl mu/m technology. All these features and the small cell size compared to any other flash cell make this device a very attractive solution for all NVM applications.

E. Aloni

Papers

NROM: A novel localized trapping, 2-bit nonvolatile memory cell