The aim of this paper is to present a review of current control techniques for three-phase voltage-source pulsewidth modulated converters. Various techniques, different in concept, have been described in two main groups: linear and nonlinear. The first includes proportional integral (stationary and synchronous) and state feedback controllers, and predictive techniques with constant switching frequency. The second comprises bang-bang (hysteresis, delta modulation) controllers and predictive controllers with on-line optimization. New trends in current control-neural networks and fuzzy-logic-based controllers-are discussed, as well. Selected oscillograms accompany the presentation in order to illustrate properties of the described controller groups.

Current control techniques for three-phase voltage-source PWM converters: a survey

This chapter gives a description and overview of power electronic technologies including a description of the fundamental systems that are the building blocks of power electronic systems. Technologies that are described include: power semiconductor switching devices, converter circuits that process energy from one DC level to another DC level, converters that produce variable frequency from DC sources, principles of rectifying AC input voltage in uncontrolled DC output voltage and their extension to controlled rectifiers, converters that convert to AC from DC (inverters) or from AC with fixed or variable output frequency (AC controllers, DC–DC–AC converters, matrix converters, or cycloconverters). The chapter also covers control of power converters with focus on pulse width modulation (PWM) control techniques.

https://www.springer.com/cda/content/document/cda_downloaddocument/9781447151036-c2.pdf?SGWID=0-0-45-1404710-p175009438

Fundamentals of Power Electronics

This paper comprehensively analyzes the relationship between space-vector modulation and three-phase carrier-based pulse width modulation (PWM). The relationships involved, such as the relationship between modulation signals (including zero-sequence component and fundamental components) and space vectors, the relationship between the modulation signals and the space-vector sectors, the relationship between the switching pattern of space-vector modulation and the type of carrier, and the relationship between the distribution of zero vectors and different zero-sequence signal are systematically established. All the relationships provide a bidirectional bridge for the transformation between carrier-based PWM modulators and space-vector modulation modulators. It is shown that all the drawn conclusions are independent of the load type. Furthermore, the implementations of both space-vector modulation and carrier-based PWM in a closed-loop feedback converter are discussed.

https://u.dianyuan.com/bbs/u/26/1109124433.pdf

Relationship between space-vector modulation and three-phase carrier-based PWM: a comprehensive analysis [three-phase inverters]

A direct induction machine torque control method based on predictive, deadbeat control of the torque and flux is presented. By estimating the synchronous speed and the voltage behind the transient reactance, the change in torque and flux over the switching period is calculated. The stator voltage required to cause the torque and flux to be equal to their respective reference values is calculated. Space vector PWM is used to define the inverter switching state. An alternative approach to deadbeat control for use in the transient or pulse-dropping mode is also presented. An alternative modulation scheme is presented in which transient performance is improved by specifying the inverter switching states and then calculating the required switched instants to maintain deadbeat control of the flux while reducing the torque error during the entire switching interval. A similar approach is used for a transient in the flux. The implementation of the control scheme using DSP-based hardware is described, with complete experimental results given. >

Direct torque control of induction machines using space vector modulation

This paper presents a new direct power control (DPC) strategy for a doubly fed induction generator (DFIG)-based wind energy generation system. The strategy is based on the direct control of stator active and reactive power by selecting appropriate voltage vectors on the rotor side. It is found that the initial rotor flux has no impact on the changes of the stator active and reactive power. The proposed method only utilizes the estimated stator flux so as to remove the difficulties associated with rotor flux estimation. The principles of this method are described in detail in this paper. The only machine parameter required by the proposed DPC method is the stator resistance whose impact on the system performance is found to be negligible. Simulation results on a 2 MW DFIG system are provided to demonstrate the effectiveness and robustness of the proposed control strategy during variations of active and reactive power, rotor speed, machine parameters, and converter dc link voltage

/pdf/direct-active-and-reactive-power-control-of-dfig-for-wind-3hgltet7w2.pdf

Direct active and reactive power control of DFIG for wind energy generation

A space vector concept for deriving the switching times for pulsewidth-modulated voltage source inverters is compared with the conventional sinusoidal concept. The switching times are deducted from assumptions for minimum current distortion, the resulting mean voltage values are shown, and the differences between these and the established sinusoidal PWM (pulse-width modulator) are elaborated. Based on an analytical calculation the current distortions and torque ripples are evaluated and compared with the values obtained with the conventional method. The space vector representation results in lower current harmonics and possibly a higher modulation index. A modulator based on an 8086 microprocessor has been implemented, and its performance is reported. >

G.V. Stanke

Papers

Analysis and realization of a pulsewidth modulator based on voltage space vectors