Cellulose fibrils with widths in the nanometer range are nature-based materials with unique and potentially useful features. Most importantly, these novel nanocelluloses open up the strongly expanding fields of sustainable materials and nanocomposites, as well as medical and life-science devices, to the natural polymer cellulose. The nanodimensions of the structural elements result in a high surface area and hence the powerful interaction of these celluloses with surrounding species, such as water, organic and polymeric compounds, nanoparticles, and living cells. This Review assembles the current knowledge on the isolation of microfibrillated cellulose from wood and its application in nanocomposites; the preparation of nanocrystalline cellulose and its use as a reinforcing agent; and the biofabrication of bacterial nanocellulose, as well as its evaluation as a biomaterial for medical implants.

Nanocelluloses: A New Family of Nature-Based Materials

Although measurements of crystallinity index (CI) have a long history, it has been found that CI varies significantly depending on the choice of measurement method. In this study, four different techniques incorporating X-ray diffraction and solid-state 13C nuclear magnetic resonance (NMR) were compared using eight different cellulose preparations. We found that the simplest method, which is also the most widely used, and which involves measurement of just two heights in the X-ray diffractogram, produced significantly higher crystallinity values than did the other methods. Data in the literature for the cellulose preparation used (Avicel PH-101) support this observation. We believe that the alternative X-ray diffraction (XRD) and NMR methods presented here, which consider the contributions from amorphous and crystalline cellulose to the entire XRD and NMR spectra, provide a more accurate measure of the crystallinity of cellulose. Although celluloses having a high amorphous content are usually more easily digested by enzymes, it is unclear, based on studies published in the literature, whether CI actually provides a clear indication of the digestibility of a cellulose sample. Cellulose accessibility should be affected by crystallinity, but is also likely to be affected by several other parameters, such as lignin/hemicellulose contents and distribution, porosity, and particle size. Given the methodological dependency of cellulose CI values and the complex nature of cellulase interactions with amorphous and crystalline celluloses, we caution against trying to correlate relatively small changes in CI with changes in cellulose digestibility. In addition, the prediction of cellulase performance based on low levels of cellulose conversion may not include sufficient digestion of the crystalline component to be meaningful.

/pdf/cellulose-crystallinity-index-measurement-techniques-and-1yrq80n81q.pdf

Cellulose crystallinity index: measurement techniques and their impact on interpreting cellulase performance

Enzymatic hydrolysis combined with mechanical shearing and high-pressure homogenization for nanoscale cellulose fibrils and strong gels.

Polycaprolactone (PCL) is an important polymer due to its mechanical properties, miscibility with a large range of other polymers and biodegradability. Two main pathways to produce polycaprolactone have been described in the literature: the polycondensation of a hydroxycarboxylic acid: 6-hydroxyhexanoic acid, and the ring-opening polymerisation (ROP) of a lactone: e-caprolactone (e-CL). This critical review summarises the different conditions which have been described to synthesise PCL, and gives a broad overview of the different catalytic systems that were used (enzymatic, organic and metal catalyst systems). A surprising variety of catalytic systems have been studied, touching on virtually every section of the periodic table. A detailed list of reaction conditions and catalysts/initiators is given and reaction mechanisms are presented where known. Emphasis is put on the ROP pathway due to its prevalence in the literature and the superior polymer that is obtained. In addition, ineffective systems that have been tried to catalyse the production of PCL are included in the electronic supplementary information for completeness (141 references).

/pdf/synthesis-of-polycaprolactone-a-review-vlm9rxg878.pdf

Synthesis of polycaprolactone: a review

Modern synthetic methods have revolutionized polymer chemistry through the development of new and powerful strategies for the controlled synthesis of complex polymer architectures. 1-5 Many of these developments were spawned by new classes of transition metal catalysts for the synthesis of new polyolefin microstructures, 5 the design of highly efficient families of “living” polymerization strategies for the synthesis of block, graft, and star polymers, 6-12 controlled methods for the synthesis of dendritic macromolecules, 3,13,14

Organocatalytic ring-opening polymerization.

Assignment of non-crystalline forms in cellulose I by CP/MAS 13C NMR spectroscopy

A CP/MAS13C NMR investigation of molecular ordering in celluloses

CP/MAS 13C-NMR spectroscopy applied to structure and interaction studies on cellulose I.

Cationic catalysis using simple carboxylic acids to combine the ring-opening polymerization of e-caprolactone and the regioselective acylation of carbohydrates has been investigated. l-Lactic acid catalyzed the acylation of methyl β-d-glucopyranoside and sucrose with e-caprolactone in high yield by bulk polymerization at 120 °C. The main products were regioselectively acylated on the primary hydroxyl groups of the carbohydrate end groups. The overall conversion to methyl β-d-glucopyranoside-functionalized poly(e-caprolactone) was more than 90%, Mw 2000 and polydispersity index 1.5, with one major product methyl 6-O-poly(e-caprolactone)-β-d-glucopyranoside, in agreement with the corresponding Candida antarctica lipase B-catalyzed acylation.

Selective Organocatalytic Ring-Opening Polymerization: A Versatile Route to Carbohydrate-Functionalized Poly(ε-caprolactones)

In this paper, we present a chemometric model for quantifying the cellulose forms with different states of order found within cellulose I fibrils. The relative amounts of the different cellulose forms, that is crystalline cellulose I, para-crystalline cellulose and cellulose at accessible and inaccessible cellulose surfaces, were determined by non-linear least squares fitting of the C4-region in CP/MAS 13C-NMR (Cross-Polarisation Magic Angle Spinning Carbon-13 Nuclear Magnetic Resonance) spectra. By correlating these results from the C4-region with the full spectral data we obtained a model which is able to provide an assessment of the relative amounts of the different cellulose forms directly from NMR-spectra of complex lignocellulosic samples. Furthermore, this model enabled new assignments to be made in the C1-region for signals from cellulose at accessible fibril surfaces.

Kristina Wickholm

Papers

Assignment of non-crystalline forms in cellulose I by CP/MAS 13C NMR spectroscopy

A CP/MAS13C NMR investigation of molecular ordering in celluloses

CP/MAS 13C-NMR spectroscopy applied to structure and interaction studies on cellulose I.

Selective Organocatalytic Ring-Opening Polymerization: A Versatile Route to Carbohydrate-Functionalized Poly(ε-caprolactones)

Quantification of cellulose forms in complex cellulose materials: a chemometric model