Keywords: Fragmentation Chain-Transfer ; Self-Assembled Monolayers ; Walled Carbon Nanotubes ; Well-Defined Polymer ; Nitroxide-Mediated Polymerization ; Block-Copolymer Brushes ; Poly(Methyl Methacrylate) Brushes ; Transfer Raft Polymerization ; Quartz-Crystal Microbalance ; Poly(Acrylic Acid) Brushes Reference EPFL-REVIEW-148464doi:10.1021/cr900045aView record in Web of Science Record created on 2010-04-23, modified on 2017-05-10

Polymer Brushes via Surface-Initiated Controlled Radical Polymerization: Synthesis, Characterization, Properties, and Applications

https://cyberleninka.org/article/n/1316165.pdf

Nanocellulose in biomedicine: Current status and future prospect

With the arising of global climate change and resource shortage, in recent years, increased attention has been paid to environmentally friendly materials. Trees are sustainable and renewable materials, which give us shelter and oxygen and remove carbon dioxide from the atmosphere. Trees are a primary resource that human society depends upon every day, for example, homes, heating, furniture, and aircraft. Wood from trees gives us paper, cardboard, and medical supplies, thus impacting our homes, school, work, and play. All of the above-mentioned applications have been well developed over the past thousands of years. However, trees and wood have much more to offer us as advanced materials, impacting emerging high-tech fields, such as bioengineering, flexible electronics, and clean energy. Wood naturally has a hierarchical structure, composed of well-oriented microfibers and tracheids for water, ion, and oxygen transportation during metabolism. At higher magnification, the walls of fiber cells have an interes...

https://www.fpl.fs.fed.us/documnts/pdf2016/fpl_2016_zhu001.pdf

Wood-Derived Materials for Green Electronics, Biological Devices, and Energy Applications.

Microfluidics consist of microfabricated structures for liquid handling, with cross-sections in the 1–500 μm range, and small volume capacity (fL-nL) Capillary tubes connected with fittings,1 although utilizing small volumes, are not considered microfluidics for the purposes of this paper since they are not microfabricated Likewise, millifluidic systems, made by conventional machining tools, are excluded due to their larger feature sizes (>500 μm)

Though micromachined systems for gas chromatography were introduced in the 1970’s,2 the field of microfluidics did not gain much traction until the 1990’s3 Silicon and glass were the original materials used, but then the focus shifted to include polymer substrates, and in particular, polydimethylsiloxane (PDMS) Since then the field has grown to encompass a wide variety of materials and applications The successful demonstration of electrophoresis and electroosmotic pumping in a microfluidic device provided a nonmechanical method for both fluid control and separation4 Laser induced fluorescence (LIF) enabled sensitive detection of fluorophores or fluorescently labeled molecules The expanded availability of low-cost printing allowed for cheaper and quicker mask fabrication for use in soft lithography5 Commercial microfluidic systems are now available from Abbott, Agilent, Caliper, Dolomite, Micralyne, Microfluidic Chip Shop, Micrux Technologies and Waters, as a few prominent examples For a more thorough description of the history of microfluidics, we refer the reader to a number of comprehensive, specialized reviews,3, 6–11 as well as a more general 2006 review12

The field of microfluidics offers many advantages compared to carrying out processes through bulk solution chemistry, the first of which relates to a lesson taught to every first-year chemistry student Simply stated, diffusion is slow! Thus, the smaller the distance required for interaction, the faster it will be Smaller channel dimensions also lead to smaller sample volumes (fL-nL), which can reduce the amount of sample or reagents required for testing and analysis Reduced dimensions can also lead to portable devices to enable on-site testing (provided the associated hardware is similarly portable) Finally, integration of multiple processes (like labeling, purification, separation and detection) in a microfluidic device can be highly enabling for many applications

Microelectromechanical systems (MEMS) contain integrated electrical and mechanical parts that create a sensor or system Applications of MEMS are ubiquitous, including automobiles, phones, video games and medical and biological sensors13 Micro-total analysis systems, also known as labs-on-a-chip, are the chemical analogue of MEMS, as integrated microfluidic devices that are capable of automating multiple processes relevant to laboratory sciences For example, a typical lab-on-a-chip system might selectively purify a complex mixture (through filtering, antibody capture, etc), then separate target components and detect them

Microfluidic devices consist of a core of common components Areas defined by empty space, such as reservoirs (wells), chambers and microchannels, are central to microfluidic systems Positive features, created by areas of solid material, add increased functionality to a chip and can consist of membranes, monoliths, pneumatic controls, beams and pillars Given the ubiquitous nature of negative components, and microchannels in particular, we focus here on a few of their properties Microfluidic channels have small overall volumes, laminar flow and a large surface-to-volume ratio Dimensions of a typical separation channel in microchip electrophoresis (μCE) are: 50 μm width, 15 μm height and 5 cm length for a volume of 375 nL Flow in these devices is normally nonturbulent due to low Reynolds numbers For example, water flowing at 20°C in the above channel at 1 μL/min (222 cm/s) results in a Reynolds number of ~05, where <2000 is laminar flow Since flow is nonturbulent, mixing is normally diffusion-limited Small channel sizes also have a high surface-to-volume ratio, leading to different characteristics from what are commonly found in bulk volumes The material surface can be used to manipulate fluid movement (such as by electroosmotic flow, EOF) and surface interactions For a solution in contact with a charged surface, a double layer of charge is created as oppositely charged ions are attracted to the surface charges This electrical double layer consists of an inner rigid or Stern Layer and an outer diffuse layer An electrostatic potential known as the zeta potential is formed, with the magnitude of the potential decreasing as distance from the surface increases The electrical double layer is the basis for EOF, wherein an applied voltage causes the loosely bound diffuse layer to move towards an electrode, dragging the bulk solution along Charges on the exposed surface also exert a greater influence on the fluid in a channel as its size decreases Larger surface-to-volume ratios are more prone to nonspecific adsorption and surface fouling In particular, non-charged and hydrophobic microdevice surfaces can cause proteins in solution to denature and stick

We focus our review on advances in microfluidic systems since 2008 In doing this, we occasionally must cover foundational work in microfluidics that is considerably less recent We do not focus on chemical synthesis applications of microfluidics although it is an expanding area, nor do we delve into lithography, device fabrication or production costs Our specific emphasis herein is on four areas within microfluidics: properties and applications of commonly used materials, basic functions, integration, and selected applications For each of these four topics we provide a concluding section on opportunities for future development, and at the end of this review, we offer general conclusions and prospective for future work in the field Due to the considerable scope of the field of microfluidics, we limit our discussion to selected examples from each area, but cite in-depth reviews for the reader to turn to for further information about specific topics We also refer the reader to recent comprehensive reviews on advances in lab-on-a-chip systems by Arora et al10 and Kovarik et al14

/pdf/advances-in-microfluidic-materials-functions-integration-and-27mmao3n1o.pdf

Advances in microfluidic materials, functions, integration, and applications.

The generation of polymer brushes by surface-initiated controlled radical polymerization (SI-CRP) techniques has become a powerful approach to tailor the chemical and physical properties of interfaces and has given rise to great advances in surface and interface engineering. Polymer brushes are defined as thin polymer films in which the individual polymer chains are tethered by one chain end to a solid interface. Significant advances have been made over the past years in the field of polymer brushes. This includes novel developments in SI-CRP, as well as the emergence of novel applications such as catalysis, electronics, nanomaterial synthesis and biosensing. Additionally, polymer brushes prepared via SI-CRP have been utilized to modify the surface of novel substrates such as natural fibers, polymer nanofibers, mesoporous materials, graphene, viruses and protein nanoparticles. The last years have also seen exciting advances in the chemical and physical characterization of polymer brushes, as well as an ev...

Surface-Initiated Controlled Radical Polymerization: State-of-the-Art, Opportunities, and Challenges in Surface and Interface Engineering with Polymer Brushes

Anti-fouling bioactive surfaces.

Sequential and sustained release of SDF-1 and BMP-2 from silk fibroin-nanohydroxyapatite scaffold for the enhancement of bone regeneration.

Cellulose nanofi brils (CNF), also known as nanofi brillar cellulose (NFC), are an advanced biomaterial made mainly from renewable forest and agricultural resources that have demonstrated exceptional performance in composites. In addition, they have been utilized in barrier coatings, food, transparent fl exible fi lms and other applications. Research on CNF has advanced rapidly over the last decade and several of the fundamental questions about production and characterization of CNF have been addressed. An interesting shift in focus in the recent reported literature indicates increased efforts aimed at taking advantage of the unique properties of CNF. This includes its nanoscale dimensions, high surface area, unique morphology, low density and mechanical strength. In addition, CNF can be easily (chemically) modified and is readily available, renewable, and biodegradable. These facts are expected to materialize in a more widespread use of CNF. However, there is no clear indication of the most promising avenues for CNF deployment in commercial products. This review attempts to illustrate some exciting opportunities for CNF, specifi cally, in the development of aerogels, composites, bioactive materials and inorganic/organic hybrid materials.

http://www4.ncsu.edu/~ojrojas/PDF/2013_18.pdf

Cellulose Nanofibrils: From Strong Materials to Bioactive Surfaces

Well-controlled poly(N-vinylpyrrolidone) (PVP)-grafted silicon surfaces were prepared by surface-initiated atom transfer radical polymerization (SI-ATRP) with 1,4-dioxane/water mixtures as solvents and CuCl/5,7,7,12,14,14-hexamethyl-1,4,8,11-tetraazacyclotetradecane (Me6TATD) as a catalyst. The thickness of the PVP layer on the surface increased with reaction time, suggesting that the ATRP grafting of N-vinylpyrrolidone (NVP) from the silicon surfaces was a well-controlled process. The water contact angle and X-ray photoelectron spectroscopy (XPS) were used to characterize the modified surfaces. The protein adsorption property of the PVP-grafted surfaces was evaluated using a radiolabeling method. Compared with unmodified silicon surfaces, a Si−PVP60 surface with a PVP thickness of 15.06 nm reduced the level of adsorption of fibrinogen, human serum albumin (HSA), and lysozyme by 75, 93, and 81%, respectively. Moreover, the level of fibrinogen adsorption decreases gradually with an increase in PVP thicknes...

Protein adsorption on poly(N-vinylpyrrolidone)-modified silicon surfaces prepared by surface-initiated atom transfer radical polymerization.

Diblock copolymer grafts covalently attached to surfaces have attracted considerable attention because of their special structure and novel properties. In this work, poly(N-isopropylacrylamide)-block-polystyrene (PNIPAAm-b-PS) brushes were prepared via surface-initiated consecutive atom-transfer radical polymerization on initiator-immobilized silicon. Because of the inherent thermosensitivity of PNIPAAm and the hydrophobicity difference between the two blocks, the modified surfaces were responsive to both temperature and solvent. Moreover, the diblock copolymer brushes exhibited both resistance to nonspecific protein adsorption and unique cell interaction properties. They showed strong protein resistance in both phosphate-buffered saline and blood plasma. In particular, fibrinogen adsorption from plasma at either room temperature or body temperature was less than 8 ng/cm2, suggesting that the surfaces might possess good blood compatibility. In addition, the adhesion and detachment of L929 cells could be “...

Protein Adsorption and Cell Adhesion/Detachment Behavior on Dual-Responsive Silicon Surfaces Modified with Poly(N-isopropylacrylamide)-block-polystyrene Copolymer

Yanxia Zhang

Papers

Anti-fouling bioactive surfaces.

Sequential and sustained release of SDF-1 and BMP-2 from silk fibroin-nanohydroxyapatite scaffold for the enhancement of bone regeneration.

Cellulose Nanofibrils: From Strong Materials to Bioactive Surfaces

Protein adsorption on poly(N-vinylpyrrolidone)-modified silicon surfaces prepared by surface-initiated atom transfer radical polymerization.

Protein Adsorption and Cell Adhesion/Detachment Behavior on Dual-Responsive Silicon Surfaces Modified with Poly(N-isopropylacrylamide)-block-polystyrene Copolymer