Biomaterials are being used with increasing frequency for tissue substitution. Complex devices such as total joint replacements and the total artificial heart represent combinations of polymers and metal alloys for system and organ replacement. The major barriers to the extended use of these devices are the possibility of bacterial adhesion to biomaterials, which causes biomaterial-centered infection, and the lack of successful tissue integration or compatibility with biomaterial surfaces. Interactions of biomaterials with bacteria and tissue cells are directed not only by specific receptors and outer membrane molecules on the cell surface, but also by the atomic geometry and electronic state of the biomaterial surface. An understanding of these mechanisms is important to all fields of medicine and is derived from and relevant to studies in microbiology, biochemistry, and physics. Modifications to biomaterial surfaces at an atomic level will allow the programming of cell-to-substratum events, thereby diminishing infection by enhancing tissue compatibility or integration, or by directly inhibiting bacterial adhesion.

https://science.sciencemag.org/content/sci/237/4822/1588.full.pdf

Biomaterial-centered infection: microbial adhesion versus tissue integration.

The adherence of coagulase-negative staphylococci to smooth surfaces was assayed by measuring the optical densities of stained bacterial films adherent to the floors of plastic tissue culture plates. The optical densities correlated with the weight of the adherent bacterial film (r = 0.906; P less than 0.01). The measurements also agreed with visual assessments of bacterial adherence to culture tubes, microtiter plates, and tissue culture plates. Selected clinical strains were passed through a mouse model for foreign body infections and a rat model for catheter-induced endocarditis. The adherence measurements of animal passed strains remained the same as those of the laboratory-maintained parent strain. Spectrophotometric classification of coagulase-negative staphylococci into nonadherent and adherent categories according to these measurements had a sensitivity, specificity, and accuracy of 90.6, 80.8, and 88.4%, respectively. We examined a previously described collection of 127 strains of coagulase-negative staphylococci isolated from an outbreak of intravascular catheter-associated sepsis; strains associated with sepsis were more adherent than blood culture contaminants and cutaneous strains (P less than 0.001). We also examined a collection of 84 strains isolated from pediatric patients with cerebrospinal fluid (CSF) shunts; once again, pathogenic strains were more adherent than were CSF contaminants (P less than 0.01). Finally, we measured the adherence of seven endocarditis strains. As opposed to strains associated with intravascular catheters and CSF shunts, endocarditis strains were less adherent than were saprophytic strains of coagulase-negative staphylococci. The optical densities of bacterial films adherent to plastic tissue culture plates serve as a quantitative model for the study of the adherence of coagulase-negative staphylococci to medical devices, a process which may be important in the pathogenesis of foreign body infections. Images

Adherence of coagulase-negative staphylococci to plastic tissue culture plates: a quantitative model for the adherence of staphylococci to medical devices.

A modified microtiter-plate test for quantification of staphylococcal biofilm formation.

Determination of the MIC, based on the activities of antibiotics against planktonic bacteria, is the standard assay for antibiotic susceptibility testing. Adherent bacterial populations (biofilms) present with an innate lack of antibiotic susceptibility not seen in the same bacteria grown as planktonic populations. The Calgary Biofilm Device (CBD) is described as a new technology for the rapid and reproducible assay of biofilm susceptibilities to antibiotics. The CBD produces 96 equivalent biofilms for the assay of antibiotic susceptibilities by the standard 96-well technology. Biofilm formation was followed by quantitative microbiology and scanning electron microscopy. Susceptibility to a standard group of antibiotics was determined for National Committee for Clinical Laboratory Standards (NCCLS) reference strains: Escherichia coli ATCC 25922, Pseudomonas aeruginosa ATCC 27853, and Staphylococcus aureus ATCC 29213. Growth curves demonstrated that biofilms of a predetermined size could be formed on the CBD at specific time points and, furthermore, that no significant difference (P > 0.1) was seen between biofilms formed on each of the 96 pegs. The antibiotic susceptibilities for planktonic populations obtained by the NCCLS method or from the CBD were similar. Minimal biofilm eradication concentrations, derived by using the CBD, demonstrated that for biofilms of the same organisms, 100 to 1,000 times the concentration of a certain antibiotic were often required for the antibiotic to be effective, while other antibiotics were found to be effective at the MICs. The CBD offers a new technology for the rational selection of antibiotics effective against microbial biofilms and for the screening of new effective antibiotic compounds.

https://www.rug.nl/research/biomaterials/publications/presentations/hjb3/ceri-1999.pdf

The Calgary Biofilm Device: New Technology for Rapid Determination of Antibiotic Susceptibilities of Bacterial Biofilms

The process of surface adhesion and biofilm development is a survival strategy employed by virtually all bacteria and refined over millions of years. This process is designed to anchor microorganisms in a nutritionally advantageous environment and to permit their escape to greener pastures when essential growth factors have been exhausted. Bacterial attachment to a surface can be divided into several distinct phases, including primary and reversible adhesion, secondary and irreversible adhesion, and biofilm formation. Each of these phases is ultimately controlled by the expression of one or more gene products. Ultrastructurally, the mature bacterial biofilm resembles an underwater coral reef containing pyramidal or mushroom-shaped microcolonies of organisms embedded within an extracellular glycocalyx, with channels and cavities to allow the exchange of nutrients and waste. The biofilm protects its inhabitants from predators, dehydration, biocides, and other environmental extremes while regulating population growth and diversity through primitive cell signals. From a physiological standpoint, surface-bound bacteria behave quite differently from their planktonic counterparts. Recognizing that bacteria naturally occur as surface-bound and often polymicrobic communities, the practice of performing antimicrobial susceptibility tests using pure cultures and in a planktonic growth mode should be questioned. That this model does not reflect conditions found in nature might help explain the difficulties encountered in the management and treatment of biomedical implant infections.

/pdf/bacterial-adhesion-seen-any-good-biofilms-lately-2f7wm9gh5j.pdf

Bacterial Adhesion: Seen Any Good Biofilms Lately?

Slime production is not a generally recognized feature of Staphylococcus epidermidis. In a recent outbreak of S. epidermidis intravascular catheter-associated sepsis, we noted that 63% of clinically implicated strains grew as a slimy film coating the culture tube walls when propagated in tryptic soy broth. Only 37% of randomly collected blood culture contaminants and skin isolates demonstrated a similar phenomenon (p less than 0.05). Transmission electron micrographs of these coating bacteria showed them to be encased in an extracellular matrix that stained with alcian blue. Slime production was most evident in autoclaved media containing Casamino Acids and glucose supplementation (0.25% wt/vol). There were strain and media preparation variability of slime production in the presence of other carbohydrates. Some strains were not able to produce slime under any of the tested conditions. The production or nonproduction of slime did not influence growth rate. When grown in vitro, slime producers accumulated on the surface of intravascular catheters as macrocolonies, whereas non-slime, producers did not. Transmission and scanning electron micrographs showed slime producers to be encased in an adhesive layer on the catheter surface, whereas nonproducers were not encased. These results suggest that slime-mediated adherence may be a critical factor in the pathogenesis of S. epidermidis infections of medical devices.

Adherence of slime-producing strains of Staphylococcus epidermidis to smooth surfaces.

The virulence of two previously described Staphylococcus epidermidis strains was examined in an experimental model of foreign body infection in mice. Animals challenged with the slime-producing strain developed three times as many infections as animals challenged with the strain that did not produce slime (P less than 0.001). Bacterial isolates recovered from the infected sites retained the characteristics of the inoculated strain. Animals without foreign bodies but challenged in a similar manner with either staphylococcal strain did not become infected. Thus, the presence of a foreign body predisposed the animals to S. epidermidis infection. These results indicate that the production of slime by S. epidermidis is a stable characteristic retained after animal passage and may be important in the pathogenesis of these infections. Images

A L Bisno

Papers

Adherence of slime-producing strains of Staphylococcus epidermidis to smooth surfaces.

Experimental foreign body infections in mice challenged with slime-producing Staphylococcus epidermidis.