Biomaterials are being used with increasing frequency for tissue substitution. Complex devices such as total joint replacements and the total artificial heart represent combinations of polymers and metal alloys for system and organ replacement. The major barriers to the extended use of these devices are the possibility of bacterial adhesion to biomaterials, which causes biomaterial-centered infection, and the lack of successful tissue integration or compatibility with biomaterial surfaces. Interactions of biomaterials with bacteria and tissue cells are directed not only by specific receptors and outer membrane molecules on the cell surface, but also by the atomic geometry and electronic state of the biomaterial surface. An understanding of these mechanisms is important to all fields of medicine and is derived from and relevant to studies in microbiology, biochemistry, and physics. Modifications to biomaterial surfaces at an atomic level will allow the programming of cell-to-substratum events, thereby diminishing infection by enhancing tissue compatibility or integration, or by directly inhibiting bacterial adhesion.

https://science.sciencemag.org/content/sci/237/4822/1588.full.pdf

Biomaterial-centered infection: microbial adhesion versus tissue integration.

The adherence of coagulase-negative staphylococci to smooth surfaces was assayed by measuring the optical densities of stained bacterial films adherent to the floors of plastic tissue culture plates. The optical densities correlated with the weight of the adherent bacterial film (r = 0.906; P less than 0.01). The measurements also agreed with visual assessments of bacterial adherence to culture tubes, microtiter plates, and tissue culture plates. Selected clinical strains were passed through a mouse model for foreign body infections and a rat model for catheter-induced endocarditis. The adherence measurements of animal passed strains remained the same as those of the laboratory-maintained parent strain. Spectrophotometric classification of coagulase-negative staphylococci into nonadherent and adherent categories according to these measurements had a sensitivity, specificity, and accuracy of 90.6, 80.8, and 88.4%, respectively. We examined a previously described collection of 127 strains of coagulase-negative staphylococci isolated from an outbreak of intravascular catheter-associated sepsis; strains associated with sepsis were more adherent than blood culture contaminants and cutaneous strains (P less than 0.001). We also examined a collection of 84 strains isolated from pediatric patients with cerebrospinal fluid (CSF) shunts; once again, pathogenic strains were more adherent than were CSF contaminants (P less than 0.01). Finally, we measured the adherence of seven endocarditis strains. As opposed to strains associated with intravascular catheters and CSF shunts, endocarditis strains were less adherent than were saprophytic strains of coagulase-negative staphylococci. The optical densities of bacterial films adherent to plastic tissue culture plates serve as a quantitative model for the study of the adherence of coagulase-negative staphylococci to medical devices, a process which may be important in the pathogenesis of foreign body infections. Images

Adherence of coagulase-negative staphylococci to plastic tissue culture plates: a quantitative model for the adherence of staphylococci to medical devices.

A modified microtiter-plate test for quantification of staphylococcal biofilm formation.

Determination of the MIC, based on the activities of antibiotics against planktonic bacteria, is the standard assay for antibiotic susceptibility testing. Adherent bacterial populations (biofilms) present with an innate lack of antibiotic susceptibility not seen in the same bacteria grown as planktonic populations. The Calgary Biofilm Device (CBD) is described as a new technology for the rapid and reproducible assay of biofilm susceptibilities to antibiotics. The CBD produces 96 equivalent biofilms for the assay of antibiotic susceptibilities by the standard 96-well technology. Biofilm formation was followed by quantitative microbiology and scanning electron microscopy. Susceptibility to a standard group of antibiotics was determined for National Committee for Clinical Laboratory Standards (NCCLS) reference strains: Escherichia coli ATCC 25922, Pseudomonas aeruginosa ATCC 27853, and Staphylococcus aureus ATCC 29213. Growth curves demonstrated that biofilms of a predetermined size could be formed on the CBD at specific time points and, furthermore, that no significant difference (P > 0.1) was seen between biofilms formed on each of the 96 pegs. The antibiotic susceptibilities for planktonic populations obtained by the NCCLS method or from the CBD were similar. Minimal biofilm eradication concentrations, derived by using the CBD, demonstrated that for biofilms of the same organisms, 100 to 1,000 times the concentration of a certain antibiotic were often required for the antibiotic to be effective, while other antibiotics were found to be effective at the MICs. The CBD offers a new technology for the rational selection of antibiotics effective against microbial biofilms and for the screening of new effective antibiotic compounds.

https://www.rug.nl/research/biomaterials/publications/presentations/hjb3/ceri-1999.pdf

The Calgary Biofilm Device: New Technology for Rapid Determination of Antibiotic Susceptibilities of Bacterial Biofilms

Recent studies have indicated that the attachment of bacteria to mucosal surfaces is the initial event in the pathogenesis of most infectious diseases due to bacteria in animals and humans. An understanding of the mechanisms of attachment and a definition of the adhesive molecules on the surfaces of bacteria (adhesins) as well as those on host cell membranes (receptors) have suggested new approaches to the prevention of serious bacterial infections: (1) application of purified adhesion or receptor materials or their analogues as competitive inhibitors of bacterial adherence; (2) administration of sublethal concentrations of antibiotics that suppress the formation and expression of bacterial adhesins; and (3) development of vaccines against bacterial surface components involved in adhesion to mucosal surfaces. Progress has already been made in the development of antiadhesive vaccines directed against the fimbrial adhesins of several human bacterial pathogens.

Bacterial Adherence: Adhesin-Receptor Interactions Mediating the Attachment of Bacteria to Mucosal Surfaces

Slime production is not a generally recognized feature of Staphylococcus epidermidis. In a recent outbreak of S. epidermidis intravascular catheter-associated sepsis, we noted that 63% of clinically implicated strains grew as a slimy film coating the culture tube walls when propagated in tryptic soy broth. Only 37% of randomly collected blood culture contaminants and skin isolates demonstrated a similar phenomenon (p less than 0.05). Transmission electron micrographs of these coating bacteria showed them to be encased in an extracellular matrix that stained with alcian blue. Slime production was most evident in autoclaved media containing Casamino Acids and glucose supplementation (0.25% wt/vol). There were strain and media preparation variability of slime production in the presence of other carbohydrates. Some strains were not able to produce slime under any of the tested conditions. The production or nonproduction of slime did not influence growth rate. When grown in vitro, slime producers accumulated on the surface of intravascular catheters as macrocolonies, whereas non-slime, producers did not. Transmission and scanning electron micrographs showed slime producers to be encased in an adhesive layer on the catheter surface, whereas nonproducers were not encased. These results suggest that slime-mediated adherence may be a critical factor in the pathogenesis of S. epidermidis infections of medical devices.

Adherence of slime-producing strains of Staphylococcus epidermidis to smooth surfaces.

The virulence of two previously described Staphylococcus epidermidis strains was examined in an experimental model of foreign body infection in mice. Animals challenged with the slime-producing strain developed three times as many infections as animals challenged with the strain that did not produce slime (P less than 0.001). Bacterial isolates recovered from the infected sites retained the characteristics of the inoculated strain. Animals without foreign bodies but challenged in a similar manner with either staphylococcal strain did not become infected. Thus, the presence of a foreign body predisposed the animals to S. epidermidis infection. These results indicate that the production of slime by S. epidermidis is a stable characteristic retained after animal passage and may be important in the pathogenesis of these infections. Images

Experimental foreign body infections in mice challenged with slime-producing Staphylococcus epidermidis.

The relationship between the variability in the fibronectin (Fn) content on human buccal epithelial cells and the capacity of the cells to bind gram-positive (Streptococcus pyogenes) or gram-negative (Escherichia coli or Pseudomonas aeruginosa) bacteria was investigated. Adhesion experiments performed with mixtures of epithelial cells and mixed suspensions of either S. pyogenes and E. coli or S. pyogenes and P. aeruginosa exhibited three major populations of buccal cells: one of these was able to bind S. pyogenes (gram positive) but neither of the gram-negative bacteria; a second population was able to bind the gram-negative but not the gram-positive bacteria; and a third was able to bind various numbers of both types of organisms. Further adhesion experiments performed with a mixture of epithelial cells and a mixed suspension of S. pyrogens, E. coli, and fluoresceinconjugated methacrylate beads coated with immune immunoglobulin G directed against Fn revealed that the epithelial cells recognizing the gram-positive bacteria were rich in Fn, whereas those recognizing the gram-negative organisms were poor in Fn. Immunoelectron microscopy confirmed that cells of S. pyogenes bound to epithelial cells coated with Fn, whereas cells of E. coli bound to epithelial cells lacking Fn. These results suggest that Fn on the surfaces of epithelial cells may modulate the ecology of the human oropharyngeal cavity, especially with respect to the colonization of these surfaces by pathogenic gram-negative or gram-positive bacteria.

https://iai.asm.org/content/iai/41/3/1261.full.pdf

Adherence of streptococcus pyogenes, Escherichia coli, and Pseudomonas aeruginosa to fibronectin-coated and uncoated epithelial cells

The growth of Staphylococcus epidermidis sensu stricto and Staphylococcus saprophyticus on Memphis agar yielded up to 6 morphotypes with each strain. With S. epidermidis, one morphotype produced slime (rho) but became non-slime-producing (epsilon) at a high frequency. The slime-producing rho variants were methicillin-resistant and more virulent than methicillin-susceptible epsilon variants in an endocarditis model. With S. saprophyticus, phase variation was of higher frequency. Nitrosoguanidine mutagenesis produced a stable blue epsilon form that was more virulent than the parent in a mouse model of urinary tract infection. Mutants with the blue epsilon phenotype differed from gold epsilon parents in a variety of phenotypic properties, including increased resistance to oxacillin. These staphylococcal species have a high frequency of phase variation: Phase variants differ in antibiotic resistance and virulence, which is only partially correlated with suggested virulence factors such as slime production.

Colonial morphology of staphylococci on Memphis agar: phase variation of slime production, resistance to beta-lactam antibiotics, and virulence.

The pathogenic Staphylococcus epidermidis strain RP62A (ATCC 35984) adheres to smooth surfaces by forming a tenacious bacterial film known as slime. The mechanism of slime production is not known; however, workers in the laboratory of G. Pier (Harvard Medical School, Boston, Mass.) have isolated from RP62A a galactose-rich capsular polysaccharide adhesin (CPA) which mediates the attachment of the organism to smooth surfaces. We have obtained two daughter strains from RP62A that no longer produce slime. One daughter strain, H4A, was obtained by selection for a spontaneous variant; the other strain, HAM892, was obtained by treating growing cultures of RP62A with acriflavin. Using an antiserum generated against whole cells of RP62A, we have examined lysozyme-lysostaphin digests of RP62A, H4A, and HAM892 by double immunodiffusion. The two strains that no longer produced slime no longer produced a particular antigen, which we refer to as the slime-associated antigen (SAA). SAA was also produced by unrelated strains of slime-producing S. epidermidis. SAA was heat and protease stable, had a molecular weight of greater than 50,000, and could be partially purified by chromatographing trypsin-digested material over a Sephadex G-200 column. Chemical analysis of partially purified SAA by gas-liquid chromatography found SAA to be glucose rich (59%) and galactose poor (1.4%). This analysis chemically distinguished SAA from CPA. When tested together by double immunodiffusion with anti-RP62A and anti-CPA antisera, partially purified SAA did not cross-react with CPA. Kinetic studies suggested that SAA is a marker for surface accumulation whereas CPA mediates initial adherence.

W A Simpson

Papers

Adherence of slime-producing strains of Staphylococcus epidermidis to smooth surfaces.

Experimental foreign body infections in mice challenged with slime-producing Staphylococcus epidermidis.

Adherence of streptococcus pyogenes, Escherichia coli, and Pseudomonas aeruginosa to fibronectin-coated and uncoated epithelial cells

Colonial morphology of staphylococci on Memphis agar: phase variation of slime production, resistance to beta-lactam antibiotics, and virulence.

Identification of an antigenic marker of slime production for Staphylococcus epidermidis.