I have developed "tennis elbow" from lugging this book around the past four weeks, but it is worth the pain, the effort, and the aspirin. It is also worth the (relatively speaking) bargain price. Including appendixes, this book contains 894 pages of text. The entire panorama of the neural sciences is surveyed and examined, and it is comprehensive in its scope, from genomes to social behaviors. The editors explicitly state that the book is designed as "an introductory text for students of biology, behavior, and medicine," but it is hard to imagine any audience, interested in any fragment of neuroscience at any level of sophistication, that would not enjoy this book. The editors have done a masterful job of weaving together the biologic, the behavioral, and the clinical sciences into a single tapestry in which everyone from the molecular biologist to the practicing psychiatrist can find and appreciate his or

Principles of Neural Science

Conductometric semiconducting metal oxide gas sensors have been widely used and investigated in the detection of gases. Investigations have indicated that the gas sensing process is strongly related to surface reactions, so one of the important parameters of gas sensors, the sensitivity of the metal oxide based materials, will change with the factors influencing the surface reactions, such as chemical components, surface-modification and microstructures of sensing layers, temperature and humidity. In this brief review, attention will be focused on changes of sensitivity of conductometric semiconducting metal oxide gas sensors due to the five factors mentioned above.

Metal oxide gas sensors: Sensitivity and influencing factors

Metal oxide-based resistive-type gas sensors are solid-state devices which are widely used in a number of applications from health and safety to energy efficiency and emission control. Nanomaterials such as nanowires, nanorods, and nanoparticles have dominated the research focus in this field due to their large number of surface sites facilitating surface reactions. Previous studies have shown that incorporating two or more metal oxides to form a heterojunction interface can have drastic effects on gas sensor performance, especially the selectivity. Recently, these effects have been amplified by designing heterojunctions on the nano-scale. These designs have evolved from mixed commercial powders and bi-layer films to finely-tuned core–shell and hierarchical brush-like nanocomposites. This review details the various morphological classes currently available for nanostructured metal-oxide based heterojunctions and then presents the dominant electronic and chemical mechanisms that influence the performance of these materials as resistive-type gas sensors. Mechanisms explored include p–n and n–n potential barrier manipulation, n–p–n response type inversions, spill-over effects, synergistic catalytic behavior, and microstructure enhancement. Tables are presented summarizing these works specifically for SnO2, ZnO, TiO2, In2O3, Fe2O3, MoO3, Co3O4, and CdO-based nanocomposites. Recent developments are highlighted and likely future trends are explored.

Nanoscale metal oxide-based heterojunctions for gas sensing: A review

The gas sensors fabricated by using conducting polymers such as polyaniline (PAni), polypyrrole (PPy) and poly (3,4-ethylenedioxythiophene) (PEDOT) as the active layers have been reviewed. This review discusses the sensing mechanism and configurations of the sensors. The factors that affect the performances of the gas sensors are also addressed. The disadvantages of the sensors and a brief prospect in this research field are discussed at the end of the review.

/pdf/gas-sensors-based-on-conducting-polymers-4l6i49715q.pdf

Gas Sensors Based on Conducting Polymers

Hierarchical and hollow oxide nanostructures are very promising gas sensor materials due to their high surface area and well-aligned nanoporous structures with a less agglomerated configurations. Various synthetic strategies to prepare such hierarchical and hollow structures for gas sensor applications are reviewed and the principle parameters and mechanisms to enhance the gas sensing characteristics are investigated. The literature data clearly show that hierarchical and hollow nanostructures increase both the gas response and response speed simultaneously and substantially. This can be explained by the rapid and effective gas diffusion toward the entire sensing surfaces via the porous structures. Finally, the impact of highly sensitive and fast responding gas sensors using hierarchical and hollow nanostructures on future research directions is discussed.

Gas sensors using hierarchical and hollow oxide nanostructures: Overview

A compendium of all the volatile organic compounds (VOCs) emanating from the human body (the volatolome) is for the first time reported. 1840 VOCs have been assigned from breath (872), saliva (359), blood (154), milk (256), skin secretions (532) urine (279), and faeces (381) in apparently healthy individuals. Compounds were assigned CAS registry numbers and named according to a common convention where possible. The compounds have been grouped into tables according to their chemical class or functionality to permit easy comparison. Some clear differences are observed, for instance, a lack of esters in urine with a high number in faeces. Careful use of the database is needed. The numbers may not be a true reflection of the actual VOCs present from each bodily excretion. The lack of a compound could be due to the techniques used or reflect the intensity of effort e.g. there are few publications on VOCs from blood compared to a large number on VOCs in breath. The large number of volatiles reported from skin is partly due to the methodologies used, e.g. collecting excretions on glass beads and then heating to desorb VOCs. All compounds have been included as reported (unless there was a clear discrepancy between name and chemical structure), but there may be some mistaken assignations arising from the original publications, particularly for isomers. It is the authors' intention that this database will not only be a useful database of VOCs listed in the literature, but will stimulate further study of VOCs from healthy individuals. Establishing a list of volatiles emanating from healthy individuals and increased understanding of VOC metabolic pathways is an important step for differentiating between diseases using VOCs.

https://iopscience.iop.org/article/10.1088/1752-7155/8/1/014001/pdf

A review of the volatiles from the healthy human body

Little is known about the volatile organic compounds (VOCs) in feces and their potential health consequences. Patients and healthcare professionals have observed that feces often smell abnormal during gastrointestinal disease. The aim of this work was to define the volatiles emitted from the feces of healthy donors and patients with gastrointestinal disease. Our hypotheses were that i) VOCs would be shared in health; ii) VOCs would be constant in individuals; and iii) specific changes in VOCs would occur in disease. Volatile emissions in health were defined in a cohort and a longitudinal study. Subsequently, the pattern of volatiles found in the cohort study were compared to that found from patients with ulcerative colitis, Campylobacter jejuni, and Clostridium difficile. Volatiles from feces were collected by solid-phase microextraction and analyzed by gas chromatography/mass spectrometry. In the cohort study, 297 volatiles were identified. In all samples, ethanoic, butanoic, pentanoic acids, benzaldehyd...

Volatile organic compounds from feces and their potential for diagnosis of gastrointestinal disease

Sugar malabsorption in the bowel can lead to bloating, cramps, diarrhea and other symptoms of irritable bowel syndrome as well as affecting absorption of other nutrients. The hydrogen breath test is now a well established noninvasive test for assessing malabsorption of sugars in the small intestine. However, there are patients who can suffer from the same spectrum of malabsorption issues but who produce little or no hydrogen, instead producing relatively large amounts of methane. These patients will avoid detection with the traditional breath test for malabsorption based on hydrogen detection. Likewise the hydrogen breath test is an established method for small intestinal bacterial overgrowth (SIBO) diagnoses. Therefore, a number of false negatives would be expected for patients who solely produce methane. Usually patients produce either hydrogen or methane, and only rarely there are significant co-producers, as typically the methane is produced at the expense of hydrogen by microbial conversion of carbon dioxide. Various studies show that methanogens occur in about a third of all adult humans; therefore, there is significant potential for malabsorbers to remain undiagnosed if a simple hydrogen breath test is used. As an example, the hydrogen-based lactose malabsorption test is considered to result in about 5-15% false negatives mainly due to methane production. Until recently methane measurements were more in the domain of research laboratories, unlike hydrogen analyses which can now be undertaken at a relatively low cost mainly due to the invention of reliable electrochemical hydrogen sensors. More recently, simpler lower cost instrumentation has become commercially available which can directly measure both hydrogen and methane simultaneously on human breath. This makes more widespread clinical testing a realistic possibility. The production of small amounts of hydrogen and/or methane does not normally produce symptoms, whereas the production of higher levels can lead to a wide range of symptoms ranging from functional disorders of the bowel to low level depression. It is possible that excess methane levels may have more health consequences than excess hydrogen levels. This review describes the health consequences of methane production in humans and animals including a summary of the state of the art in detection methods. In conclusion, the combined measurement of hydrogen and methane should offer considerable improvement in the diagnosis of malabsorption syndromes and SIBO when compared with a single hydrogen breath test.

https://sibotesting.com/wp-content/uploads/2015/10/The-Importance-of-Methane-Breath-Testing.pdf

The importance of methane breath testing: a review

This study describes novel work on the use of UV-light emitting diodes (LEDs) to enhance the room temperature gas sensitivity of thick film zinc oxide sensors. Sensors based on nanoparticulates of zinc oxide activated with a UV-LED of peak wavelength 400 nm and incident light intensity 2.2 mW/cm2 were capable of detecting acetone and acetaldehyde at extremely low concentrations (1 vppb). The same sensors operated under identical conditions were also capable of detecting a range of other volatiles in the low ppm range, including hydrocarbons such as hexane, butane, propane and methane. The sensors were also sensitive to low ppm levels of volatiles when operated under high humidity conditions (100% relative humidity).

We found that the optimal sensitivity of the sensor was dependent on the applied light intensity. The optimal light intensity giving maximum response was found to be analyte dependent, indicating that it is possible to tune the selectivity of the sensors by changing the applied light intensity.

A GC–MS study found that the UV irradiated zinc oxide sensor was capable of catalysing the breakdown of a range of volatiles at room temperature. The general type of catalytic decomposition is in agreement with mechanistic studies carried out on heated metal oxide sensors.

Highly sensitive room temperature sensors based on the UV-LED activation of zinc oxide nanoparticles

Volatile organic compounds (VOCs) collected from potato tubers inoculated with Phytophthora infestans (late blight), Fusarium coeruleum (dry rot) or sterilized distilled water (as a control) were analysed using gas chromatography-mass spectrometry (GC-MS) and gas chromatography-flame ionization detection (GC-FID). A total of 52 volatiles were identified by GC-MS in the headspaces above P. infestans- and F. coeruleum-inoculated tubers after incubation for 42 days in the dark at 10°C. Of these VOCs, the six most abundant were common to both pathogens. These were benzothiazole (highest abundance), 2-ethyl-1-hexanol (second highest abundance), and at approximately equal third abundance, hexanal, 2-methylpropanoic acid-2,2-dimethyl-1-(2-hydroxy-1-methylethyl)-propyl ester, 2-methylpropanoic acid-3-hydroxy-2,4,4-trimethyl-pentyl ester and phenol. In addition, styrene also occurred at approximately equal third abundance in the headspace of F. coeruleum-inoculated tubers, but at lower abundance in the headspace of P. infestans-inoculated tubers. Some VOCs were specific to each pathogen. Butanal, 3-methylbutanal, undecane and verbenone were found at low levels only in the headspace of tubers inoculated with P. infestans, while 2-pentylfuran and copaene were found only in the headspace of tubers inoculated with F. coeruleum. Additionally GC-FID analysis identified ethanol and 2-propanol in the liquid exudate from both P. infestans- and F. coeruleum-inoculated tubers after incubation for 35 days, and in the headspace after incubation for 42 days. These data provide key information for developing a sensor-based early warning system for the detection of postharvest diseases in stored potato tubers.

Gas chromatography-mass spectrometry analyses of volatile organic compounds from potato tubers inoculated with Phytophthora infestans or Fusarium coeruleum

B P J de Lacy Costello

Papers

A review of the volatiles from the healthy human body

Volatile organic compounds from feces and their potential for diagnosis of gastrointestinal disease

The importance of methane breath testing: a review

Highly sensitive room temperature sensors based on the UV-LED activation of zinc oxide nanoparticles

Gas chromatography-mass spectrometry analyses of volatile organic compounds from potato tubers inoculated with Phytophthora infestans or Fusarium coeruleum