In order to enable optical systems to operate with a high degree of compactness and reliability it is necessary to combine large number of optical functions in small monolithic structures. A development, somewhat reminiscent of that that took place in Integrated Electronics, is now beginning to take place in optics. The initial challenge in this emerging field, known appropriately as "Integrated Optics", is to demonstrate the possibility of performing basic optical functions such as light generation, coupling, modulation, and guiding in Integrated Optical configurations. The talk will review the main theoretical and experimental developments to date in Integrated Optics. Specific topics to be discussed include: Material considerations, guiding mechanisms, modulation, coupling and mode losses. The fabrication and applications of periodic thin film structures will be discussed.

Integrated optics

There has been an enormous infusion of new ideas in the field of solar cells over the last 15 years; discourse on energy transfer has gotten much richer, and nanostructures and nanomaterials have revolutionized the possibilities for new technological developments. However, solar energy cannot become ubiquitous in the world's power markets unless it can become economically competitive with legacy generation methods such as fossil fuels. The new edition of Dr. Stephen Fonash's definitive text points the way toward greater efficiency and cheaper production by adding coverage of cutting-edge topics in plasmonics, multi-exiton generation processes, nanostructures and nanomaterials such as quantum dots. This book's new structure improves readability by shifting many detailed equations to appendices, and balances the first edition's semiconductor coverage with an emphasis on thin-films. Further, it now demonstrates physical principles with simulations in the well-known AMPS computer code developed by the author. This classic text is now updated with new advances in nanomaterials and thin films that point the way to cheaper, more efficient solar energy production and, many of the detailed equations from the first edition have been shifted to appendices in order to improve readability. It carries important theoretical points are now accompanied by concrete demonstrations via included simulations created with the well-known AMPS computer code.

太阳电池器件物理 = Solar cell device physics

This review covers photonic crystal cavities (PCCs) and their applications in optical sensors, with a particular focus on the structures of different PCCs. For each kind of optical sensor, the specific measurement principle, structure of PCC, and the corresponding sensing properties are all presented in detail. The summary of the reported works and the corresponding results demonstrate that it is possible to realize miniature and high-sensitive optical sensors due to the ultra-compact size, excellent resonant properties, and flexibility in structural design of PCCs. Finally, the key problems and new directions of PCCs for sensing applications are discussed.

/pdf/a-review-for-optical-sensors-based-on-photonic-crystal-wcqhfbx0s5.pdf

A review for optical sensors based on photonic crystal cavities

Based on photonic crystal ring resonators and nonlinear Kerr effect in this paper, we proposed a 2*4 all optical decoder switch. Our proposed structure has two logic input ports and one bias input port. This decoder switch has four output ports. Via these two logic input ports, we control the bias signal to transfer toward which output port. We employed numerical methods such as plane wave expansion and finite difference time domain methods for analyzing the proposed structure.

A 2*4 all optical decoder switch based on photonic crystal ring resonators

In this paper, we proposed a novel all optical analog-to-digital (ADC) converter based on photonic crystals. First of all, we designed a three port nonlinear demultiplexer, for producing discrete levels of input optical intensity. Then, an optical coder was used to generate a 2-bit standard binary code out of the discrete levels coming from the nonlinear demultiplexer. The final structure was realized by combining the nonlinear demultiplexer with the optical coder. The maximum sampling rate of the proposed structure obtained to be about 200 GS/s, and the total footprint is about 806 μm2.

A Novel Proposal for All Optical Analog-to-Digital Converter Based on Photonic Crystal Structures

A novel design for realizing all optical analog to digital converter will be proposed in this paper. The proposed structure consists of two main parts; a nonlinear 3-channel demultiplexer, followed by an optical coder. The nonlinear demultiplexer will be used to quantize the input analog signal according to its optical intensity and the coder will convert the quantized levels into 2-bit binary codes. The nonlinear demultiplexer will be realized using three nonlinear resonant cavities. At appropriate values of input signal optical intensity one of the cavities can drop the optical beam to its corresponding output port. The proposed structure is capable of supporting maximum sampling rate up to 52 GS/s and total footprint of the structure is about 924 µm2.

All optical 2-bit analog to digital converter using photonic crystal based cavities

In this study, an all optical 4-to-2 encoder have been proposed which has four input and three output ports. The proposed structure can generate a 2-bit binary code considering which input port is active. For realising the proposed structure first the authors proposed and designed a BUFFER and an OR gate. Then combined these basic gates to realise the proposed encoder. The maximum switching delay and footprint for the proposed structure are about 200 fs and 880 μm2, respectively.

https://ietresearch.onlinelibrary.wiley.com/doi/pdf/10.1049/iet-opt.2016.0022

Proposal for 4-to-2 optical encoder based on photonic crystals

In this paper, we used the novel defective resonant cavities to design an eight-channel photonic crystal demultiplexer. We showed that by choosing appropriate values for the width of the resonant cavity, the desired wavelengths can be separated. The proposed platform has a square lattice of dielectric rods immersed in air. The value of transmission efficiency for channels was obtained in 94$$-$$-99 % range. In addition, the maximum value of crosstalk and average quality factor for channels were calculated ---11.2 dB and 2200, respectively.

Farhad Mehdizadeh

Papers

A 2*4 all optical decoder switch based on photonic crystal ring resonators

A Novel Proposal for All Optical Analog-to-Digital Converter Based on Photonic Crystal Structures

All optical 2-bit analog to digital converter using photonic crystal based cavities

Proposal for 4-to-2 optical encoder based on photonic crystals

A new proposal for eight-channel optical demultiplexer based on photonic crystal resonant cavities