There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality.

Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

I and i

Sensitive optical biosensors for unlabeled targets: a review.

An overview is presented of the current state-of-the-art in silicon nanophotonic ring resonators. Basic theory of ring resonators is discussed, and applied to the peculiarities of submicron silicon photonic wire waveguides: the small dimensions and tight bend radii, sensitivity to perturbations and the boundary conditions of the fabrication processes. Theory is compared to quantitative measurements. Finally, several of the more promising applications of silicon ring resonators are discussed: filters and optical delay lines, label-free biosensors, and active rings for efficient modulators and even light sources.

/pdf/silicon-microring-resonators-3fzr4lpxbh.pdf

Silicon microring resonators

Optical label-free detectors, such as the venerable surface plasmon resonance (SPR) sensor, are generally favored for their ability to obtain quantitative data on intermolecular binding. However, before the recent introduction of resonant microcavities that use whispering gallery mode (WGM) recirculation, sensitivity to single binding events had not materialized. Here we describe the enhancement mechanisms responsible for the extreme sensitivity of the WGM biosensor, review its current implementations and applications, and discuss its future possibilities.

/pdf/whispering-gallery-mode-biosensing-label-free-detection-down-2n81pqn4yl.pdf

Whispering-gallery-mode biosensing: label-free detection down to single molecules

Introduction A Why POC Diagnostics? B Time B Patient Responsibility and Compliance B Cost B Diagnostic Targets C Proteins C Metabolites and Other Small Molecules C Nucleic Acids C Human Cells D Microbes/Pathogens D Drugs and Food Safety D Current Context of POC Assays E POC Glucose Assays E Lateral Flow Assays E Limitations of “Traditional” POC Approaches F Enabling Technologies G Printing and Laminating G Microfluidic Technologies and Approaches: “Unit Operations” for POC Devices G Pumping and Valving H Mixing I Separation I Reagent Storage J Sample Preparation K Surface Chemistry and Device Substrates L Physical Adsorption L Bioaffinity Attachment L Covalent Attachment M Substrate Materials M Detection M Electrochemical Detection N Optical Detection N Magnetic Detection N Label-Free Methods O Enabling Multiplexed Assays O Recent Innovation O Lateral Flow Assay Technologies O Proteins P Antibodies P Protein Expression and Purification Q Nucleic Acids Q Aptamers R Infectious Diseases and Food/Water Safety R Blood Chemistry S Coagulation Markers S Whole Cells S Trends, Unmet Needs, Perspectives T Glucose T Global Health and the Developing World T Personalized Medicine and Home Testing U Technology Trends U Multiplexing V Author Information V Biographies V Acknowledgment W References W

/pdf/point-of-care-diagnostics-status-and-future-5c7xkio6mh.pdf

Point of care diagnostics: Status and future

Fluorescent microscopy and flow cytometry are widely used tools in biomedical sciences. Cost-effective translation of these technologies to remote and resource-limited environments could create new opportunities especially for telemedicine applications. Toward this direction, here we demonstrate the integration of imaging cytometry and fluorescent microscopy on a cell phone using a compact, lightweight, and cost-effective optofluidic attachment. In this cell-phone-based optofluidic imaging cytometry platform, fluorescently labeled particles or cells of interest are continuously delivered to our imaging volume through a disposable microfluidic channel that is positioned above the existing camera unit of the cell phone. The same microfluidic device also acts as a multilayered optofluidic waveguide and efficiently guides our excitation light, which is butt-coupled from the side facets of our microfluidic channel using inexpensive light-emitting diodes. Since the excitation of the sample volume occurs through...

/pdf/optofluidic-fluorescent-imaging-cytometry-on-a-cell-phone-43m6g80u95.pdf

Optofluidic Fluorescent Imaging Cytometry on a Cell Phone

We demonstrate wide-field fluorescent and darkfield imaging on a cell-phone with compact, light-weight and cost-effective optical components that are mechanically attached to the existing camera unit of the cell-phone. For this purpose, we used battery powered light-emitting diodes (LEDs) to pump the sample of interest from the side using butt-coupling, where the pump light was guided within the sample cuvette to uniformly excite the specimen. The fluorescent emission from the sample was then imaged using an additional lens that was positioned right in front of the existing lens of the cell-phone camera. Because the excitation occurs through guided waves that propagate perpendicular to our detection path, an inexpensive plastic colour filter was sufficient to create the dark-field background required for fluorescent imaging, without the need for a thin-film interference filter. We validate the performance of this platform by imaging various fluorescent micro-objects in 2 colours (i.e., red and green) over a large field-of-view (FOV) of ∼81 mm2 with a raw spatial resolution of ∼20 μm. With additional digital processing of the captured cell-phone images, through the use of compressive sampling theory, we demonstrate ∼2 fold improvement in our resolving power, achieving ∼10 μm resolution without a trade-off in our FOV. Further, we also demonstrate darkfield imaging of non-fluorescent specimen using the same interface, where this time the scattered light from the objects is detected without the use of any filters. The capability of imaging a wide FOV would be exceedingly important to probe large sample volumes (e.g., >0.1 mL) of e.g., blood, urine, sputum or water, and for this end we also demonstrate fluorescent imaging of labeled white-blood cells from whole blood samples, as well as water-borne pathogenic protozoan parasites such as Giardia Lamblia cysts. Weighing only ∼28 g (∼1 ounce), this compact and cost-effective fluorescent imaging platform attached to a cell-phone could be quite useful especially for resource-limited settings, and might provide an important tool for wide-field imaging and quantification of various lab-on-a-chip assays developed for global health applications, such as monitoring of HIV+ patients for CD4 counts or viral load measurements.

Cost-effective and compact wide-field fluorescent imaging on a cell-phone

We report a cell-phone based Escherichia coli (E. coli) detection platform for screening of liquid samples. In this compact and cost-effective design attached to a cell-phone, we utilize anti-E. coli O157:H7 antibody functionalized glass capillaries as solid substrates to perform a quantum dot based sandwich assay for specific detection of E. coli O157:H7 in liquid samples. Using battery-powered inexpensive light-emitting-diodes (LEDs) we excite/pump these labelled E. coli particles captured on the capillary surface, where the emission from the quantum dots is then imaged using the cell-phone camera unit through an additional lens that is inserted between the capillary and the cell-phone. By quantifying the fluorescent light emission from each capillary tube, the concentration of E. coli in the sample is determined. We experimentally confirmed the detection limit of this cell-phone based fluorescent imaging and sensing platform as ∼5 to 10 cfu mL−1 in buffer solution. We also tested the specificity of this E. coli detection platform by spiking samples with different species (e.g., Salmonella) to confirm that non-specific binding/detection is negligible. We further demonstrated the proof-of-concept of our approach in a complex food matrix, e.g., fat-free milk, where a similar detection limit of ∼5 to 10 cfu mL−1 was achieved despite challenges associated with the density of proteins that exist in milk. Our results reveal the promising potential of this cell-phone enabled field-portable and cost-effective E. coli detection platform for e.g., screening of water and food samples even in resource limited environments. The presented platform can also be applicable to other pathogens of interest through the use of different antibodies.

/pdf/quantum-dot-enabled-detection-of-escherichia-coli-using-a-1wvfhctc6g.pdf

Quantum dot enabled detection of Escherichia coli using a cell-phone.

Improving access to effective and affordable healthcare has long been a global endeavor. In this quest, the development of cost-effective and easy-to-use medical testing equipment that enables rapid and accurate diagnosis is essential to reduce the time and costs associated with healthcare services. To this end, point-of-care (POC) diagnostics plays a crucial role in healthcare delivery in both developed and developing countries by bringing medical testing to patients, or to sites near patients. As the diagnosis of a wide range of diseases, including various types of cancers and many endemics, relies on optical techniques, numerous compact and cost-effective optical imaging platforms have been developed in recent years for use at the POC. Here, we review the state-of-the-art optical imaging techniques that can have a significant impact on global health by facilitating effective and affordable POC diagnostics.

/pdf/optical-imaging-techniques-for-point-of-care-diagnostics-36dazwpa5u.pdf

Hongying Zhu

Papers

Sensitive optical biosensors for unlabeled targets: a review.

Optofluidic Fluorescent Imaging Cytometry on a Cell Phone

Cost-effective and compact wide-field fluorescent imaging on a cell-phone

Quantum dot enabled detection of Escherichia coli using a cell-phone.

Optical imaging techniques for point-of-care diagnostics