http://www.nanoscience.gatech.edu/paper/2012/12_NE_04.pdf

Flexible triboelectric generator

This paper reviews the state-of-the art in vibration energy harvesting for wireless, self-powered microsystems. Vibration-powered generators are typically, although not exclusively, inertial spring and mass systems. The characteristic equations for inertial-based generators are presented, along with the specific damping equations that relate to the three main transduction mechanisms employed to extract energy from the system. These transduction mechanisms are: piezoelectric, electromagnetic and electrostatic. Piezoelectric generators employ active materials that generate a charge when mechanically stressed. A comprehensive review of existing piezoelectric generators is presented, including impact coupled, resonant and human-based devices. Electromagnetic generators employ electromagnetic induction arising from the relative motion between a magnetic flux gradient and a conductor. Electromagnetic generators presented in the literature are reviewed including large scale discrete devices and wafer-scale integrated versions. Electrostatic generators utilize the relative movement between electrically isolated charged capacitor plates to generate energy. The work done against the electrostatic force between the plates provides the harvested energy. Electrostatic-based generators are reviewed under the classifications of in-plane overlap varying, in-plane gap closing and out-of-plane gap closing; the Coulomb force parametric generator and electret-based generators are also covered. The coupling factor of each transduction mechanism is discussed and all the devices presented in the literature are summarized in tables classified by transduction type; conclusions are drawn as to the suitability of the various techniques.

/pdf/energy-harvesting-vibration-sources-for-microsystems-46t885pwdp.pdf

Energy harvesting vibration sources for microsystems applications

The field of power harvesting has experienced significant growth over the past few years due to the ever-increasing desire to produce portable and wireless electronics with extended lifespans. Current portable and wireless devices must be designed to include electrochemical batteries as the power source. The use of batteries can be troublesome due to their limited lifespan, thus necessitating their periodic replacement. In the case of wireless sensors that are to be placed in remote locations, the sensor must be easily accessible or of a disposable nature to allow the device to function over extended periods of time. Energy scavenging devices are designed to capture the ambient energy surrounding the electronics and convert it into usable electrical energy. The concept of power harvesting works towards developing self-powered devices that do not require replaceable power supplies. A number of sources of harvestable ambient energy exist, including waste heat, vibration, electromagnetic waves, wind, flowing water, and solar energy. While each of these sources of energy can be effectively used to power remote sensors, the structural and biological communities have placed an emphasis on scavenging vibrational energy with piezoelectric materials. This article will review recent literature in the field of power harvesting and present the current state of power harvesting in its drive to create completely self-powered devices.

/pdf/a-review-of-power-harvesting-using-piezoelectric-materials-k69swwfj1u.pdf

A review of power harvesting using piezoelectric materials (2003–2006)

Energy harvesting generators are attractive as inexhaustible replacements for batteries in low-power wireless electronic devices and have received increasing research interest in recent years. Ambient motion is one of the main sources of energy for harvesting, and a wide range of motion-powered energy harvesters have been proposed or demonstrated, particularly at the microscale. This paper reviews the principles and state-of-art in motion-driven miniature energy harvesters and discusses trends, suitable applications, and possible future developments.

/pdf/energy-harvesting-from-human-and-machine-motion-for-wireless-3lsf4oudvo.pdf

Energy Harvesting From Human and Machine Motion for Wireless Electronic Devices

Multiferroic magnetoelectric composite systems such as ferromagnetic-ferroelectric heterostructures have recently attracted an ever-increasing interest and provoked a great number of research activities, driven by profound physics from coupling between ferroelectric and magnetic orders, as well as potential applications in novel multifunctional devices, such as sensors, transducers, memories, and spintronics. In this Review, we try to summarize what remarkable progress in multiferroic magnetoelectric composite systems has been achieved in most recent few years, with emphasis on thin films; and to describe unsolved issues and new device applications which can be controlled both electrically and magnetically.

Recent Progress in Multiferroic Magnetoelectric Composites: from Bulk to Thin Films

Vibration energy harvesting is receiving a considerable amount of interest as a means for powering wireless sensor nodes This paper presents a small (component volume 01 cm3, practical volume 015 cm3) electromagnetic generator utilizing discrete components and optimized for a low ambient vibration level based upon real application data The generator uses four magnets arranged on an etched cantilever with a wound coil located within the moving magnetic field Magnet size and coil properties were optimized, with the final device producing 46 µW in a resistive load of 4 k? from just 059 m s-2 acceleration levels at its resonant frequency of 52 Hz A voltage of 428 mVrms was obtained from the generator with a 2300 turn coil which has proved sufficient for subsequent rectification and voltage step-up circuitry The generator delivers 30% of the power supplied from the environment to useful electrical power in the load This generator compares very favourably with other demonstrated examples in the literature, both in terms of normalized power density and efficiency

/pdf/a-micro-electromagnetic-generator-for-vibration-energy-acpebp9i50.pdf

A micro electromagnetic generator for vibration energy harvesting

This paper describes the design of miniature generators capable of converting ambient vibration energy into electrical energy for use in powering intelligent sensor systems. Such a device acts as the power supply of a microsystem which can be used in inaccessible areas where wires can not be practically attached to provide power or transmit sensor data. Two prototypes of miniature generator are described and experimental results presented. Prototype A is based around two magnets coupled to a coil attached to a cantilever; prototype B is based around four magnets. For prototype A, experimental results are given for its resonant frequency and its open circuit and loaded output as a function of vibration amplitude. For prototype B, experimental results are given for the generator's Q factor in air and vacuum, its output voltage as a function of vibration amplitude as well as its magnetic field strength. This generator has been tested on a car engine and shown to produce a peak power of 3.9 mW with an average power of 157 micro watts.

/pdf/an-electromagnetic-vibration-powered-generator-for-ruoo4t4tv5.pdf

An electromagnetic, vibration-powered generator for intelligent sensor systems

This paper reviews possible strategies to increase the operational frequency range of vibration-based micro-generators. Most vibration-based micro-generators are spring-mass-damper systems which generate maximum power when the resonant frequency of the generator matches the frequency of the ambient vibration. Any difference between these two frequencies can result in a significant decrease in generated power. This is a fundamental limitation of resonant vibration generators which restricts their capability in real applications. Possible solutions include the periodic tuning of the resonant frequency of the generator so that it matches the frequency of the ambient vibration at all times or widening the bandwidth of the generator. Periodic tuning can be achieved using mechanical or electrical methods. Bandwidth widening can be achieved using a generator array, a mechanical stopper, non-linear (e.g. magnetic) springs or bi-stable structures. Tuning methods can be classified into intermittent tuning (power is consumed periodically to tune the device) and continuous tuning (the tuning mechanism is continuously powered). This paper presents a comprehensive review of the principles and operating strategies for increasing the operating frequency range of vibration-based micro-generators presented in the literature to date. The advantages and disadvantages of each strategy are evaluated and conclusions are drawn regarding the relevant merits of each approach.

/pdf/strategies-for-increasing-the-operating-frequency-range-of-cpsinzpt7h.pdf

Strategies for increasing the operating frequency range of vibration energy harvesters: a review

This paper reports the development and implementation of an energy aware autonomous wireless condition monitoring sensor system (ACMS) powered by ambient vibrations. An electromagnetic (EM) generator has been designed to harvest sufficient energy to power a radio-frequency (RF) linked accelerometer-based sensor system. The ACMS is energy aware and will adjust the measurement/transmit duty cycle according to the available energy; this is typically every 3 s at 0.6 m s?2 rms acceleration and can be as low as 0.2 m s?2 rms with a duty cycle around 12 min. The EM generator has a volume of only 150 mm3 producing an average power of 58 ?W at 0.6m s?2 rms acceleration at a frequency of 52 Hz. In addition, a voltage multiplier circuit is shown to increase the electrical damping compared to a purely resistive load; this allows for an average power of 120 ?W to be generated at 1.7 m s?2 rms acceleration. The ACMS has been successfully demonstrated on an industrial air compressor and an office air conditioning unit, continuously monitoring vibration levels and thereby simulating a typical condition monitoring application

/pdf/self-powered-autonomous-wireless-sensor-node-using-vibration-1fmtdv0wjc.pdf

Michael Tudor

Papers

Energy harvesting vibration sources for microsystems applications

A micro electromagnetic generator for vibration energy harvesting

An electromagnetic, vibration-powered generator for intelligent sensor systems

Strategies for increasing the operating frequency range of vibration energy harvesters: a review

Self-powered autonomous wireless sensor node using vibration energy harvesting