介绍了Kirk—Othmer Encyclopedia of Chemical Technology（化工技术百科全书）（第五版）电子图书网络版数据库，并对该数据库使用方法和检索途径作出了说明，且结合实例简单地介绍了该数据库的检索方法。

Kirk-Othmer Encyclopedia of Chemical Technology数据库介绍及实例

Elements Of X Ray Diffraction

Persistent organic pollutants (POPs) are carbon-based chemical substances that are resistant to environmental degradation and may not be completely removed through treatment processes. Their persistence can contribute to adverse health impacts on wild-life and human beings. Thus, the solar photocatalysis process has received increasing attention due to its great potential as a green and eco-friendly process for the elimination of POPs to increase the security of clean water. In this context, ZnO nanostructures have been shown to be prominent photocatalyst candidates to be used in photodegradation owing to the facts that they are low-cost, non-toxic and more efficient in the absorption across a large fraction of the solar spectrum compared to TiO 2 . There are several aspects, however, need to be taken into consideration for further development. The purpose of this paper is to review the photo-degradation mechanisms of POPs and the recent progress in ZnO nanostructured fabrication methods including doping, heterojunction and modification techniques as well as improvements of ZnO as a photocatalyst. The second objective of this review is to evaluate the immobilization of photocatalyst and suspension systems while looking into their future challenges and prospects.

A review of ZnO nanoparticles as solar photocatalysts: Synthesis, mechanisms and applications

In recent years, natural fibers reinforced composites have received much attention because of their lightweight, nonabrasive, combustible, nontoxic, low cost and biodegradable properties. Among the various natural fibers; flax, bamboo, sisal, hemp, ramie, jute, and wood fibers are of particular interest. A lot of research work has been performed all over the world on the use of natural fibers as a reinforcing material for the preparation of various types of composites. However, lack of good interfacial adhesion, low melting point, and poor resistance towards moisture make the use of natural fiber reinforced composites less attractive. Pretreatments of the natural fiber can clean the fiber surface, chemically modify the surface, stop the moisture absorption process, and increase the surface roughness. Among the various pretreatment techniques, graft copolymerization and plasma treatment are the best methods for surface modification of natural fibers. Graft copolymers of natural fibers with vinyl monomers provide better adhesion between matrix and fiber. In the present article, the use of pretreated natural fibers in polymer matrix-based composites has been reviewed. Effect of surface modification of natural fibers on the properties of fibers and fiber reinforced polymer composites has also been discussed. POLYM. ENG. SCI., 2009. © 2009 Society of Plastics Engineers

Pretreatments of Natural Fibers and their Application as Reinforcing Material in Polymer Composites—A Review

This paper provides a comprehensive overview on different surface treatments applied to natural fibres for advanced composites applications. In practice, the major drawbacks of using natural fibres are their high degree of moisture absorption and poor dimensional stability. The primary objective of surface treatments on natural fibres is to maximize the bonding strength so as the stress transferability in the composites. The overall mechanical properties of natural fibre reinforced polymer composites are highly dependent on the morphology, aspect ratio, hydrophilic tendency and dimensional stability of the fibres used. The effects of different chemical treatments on cellulosic fibres that are used as reinforcements for thermoset and thermoplastics are studied. The chemical sources for the treatments include alkali, silane, acetylation, benzoylation, acrylation and acrylonitrile grafting, maleated coupling agents, permanganate, peroxide, isocyanate, stearic acid, sodium chlorite, triazine, fatty acid derivate (oleoyl chloride) and fungal. The significance of chemically-treated natural fibres is seen through the improvement of mechanical strength and dimensional stability of resultant composites as compared with a pristine sample.

Chemical treatments on plant-based natural fibre reinforced polymer composites: An overview

Surface modification of inorganic nanoparticles for development of organic–inorganic nanocomposites—A review

Cellulose macro- and nanofibers have gained increasing attention due to the high strength and stiffness, biodegradability and renewability, and their production and application in development of composites. Application of cellulose nanofibers for the development of composites is a relatively new research area. Cellulose macro- and nanofibers can be used as reinforcement in composite materials because of enhanced mechanical, thermal, and biodegradation properties of composites. Cellulose fibers are hydrophilic in nature, so it becomes necessary to increase their surface roughness for the development of composites with enhanced properties. In the present paper, we have reviewed the surface modification of cellulose fibers by various methods. Processing methods, properties, and various applications of nanocellulose and cellulosic composites are also discussed in this paper.

/pdf/cellulose-based-bio-and-nanocomposites-a-review-5484pyqycf.pdf

Cellulose-Based Bio- and Nanocomposites: A Review

Interest in nanofibrillated cellulose has been increasing exponentially because of its relatively ease of preparation in high yield, high specific surface area, high strength and stiffness, low weight and biodegradability etc. This bio-based nanomaterial has been used mainly in nanocomposites due to its outstanding reinforcing potential. Solvent casting, melt mixing, in situ polymerization and electrospinning are important techniques for the fabrication of nanofibrillated cellulose-based nanocomposites. Due to hydrophilic character along with inherent tendency to form strong network held through hydrogen-bonding, nanofibrillated cellulose cannot uniformly be dispersed in most non-polar polymer matrices. Therefore, surface modification based on polymer grafting, coupling agents, acetylation and cationic modification was used in order to improve compatibility and homogeneous dispersion within polymer matrices. Nanofibrillated cellulose opens the way towards intense and promising research with expanding area of potential applications, including nanocomposite materials, paper and paperboard additive, biomedical applications and as adsorbent.

Susheel Kalia

Papers

Surface modification of inorganic nanoparticles for development of organic–inorganic nanocomposites—A review

Pretreatments of Natural Fibers and their Application as Reinforcing Material in Polymer Composites—A Review

Cellulose-Based Bio- and Nanocomposites: A Review

Nanofibrillated cellulose: surface modification and potential applications

Cellulose Fibers: Bio- and Nano-Polymer Composites