The use of silicon nanostructures in solar cells offers a number of benefits, such as the fact they can be used on flexible substrates. A silicon wire-array structure, containing reflecting nanoparticles for enhanced absorption, is now shown to achieve 96% peak absorption efficiency, capturing 85% of light with only 1% of the silicon used in comparable commercial cells. Si wire arrays are a promising architecture for solar-energy-harvesting applications, and may offer a mechanically flexible alternative to Si wafers for photovoltaics1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17. To achieve competitive conversion efficiencies, the wires must absorb sunlight over a broad range of wavelengths and incidence angles, despite occupying only a modest fraction of the array’s volume. Here, we show that arrays having less than 5% areal fraction of wires can achieve up to 96% peak absorption, and that they can absorb up to 85% of day-integrated, above-bandgap direct sunlight. In fact, these arrays show enhanced near-infrared absorption, which allows their overall sunlight absorption to exceed the ray-optics light-trapping absorption limit18 for an equivalent volume of randomly textured planar Si, over a broad range of incidence angles. We furthermore demonstrate that the light absorbed by Si wire arrays can be collected with a peak external quantum efficiency of 0.89, and that they show broadband, near-unity internal quantum efficiency for carrier collection through a radial semiconductor/liquid junction at the surface of each wire. The observed absorption enhancement and collection efficiency enable a cell geometry that not only uses 1/100th the material of traditional wafer-based devices, but also may offer increased photovoltaic efficiency owing to an effective optical concentration of up to 20 times.

Enhanced absorption and carrier collection in Si wire arrays for photovoltaic applications

We show that the Raman scattering technique can give complete structural information for one-dimensional systems, such as carbon nanotubes. Resonant confocal micro-Raman spectroscopy of an (n,m) individual single-wall nanotube makes it possible to assign its chirality uniquely by measuring one radial breathing mode frequency omega(RBM) and using the theory of resonant transitions. A unique chirality assignment can be made for both metallic and semiconducting nanotubes of diameter d(t), using the parameters gamma(0) = 2.9 eV and omega(RBM) = 248/d(t). For example, the strong RBM intensity observed at 156 cm(-1) for 785 nm laser excitation is assigned to the (13,10) metallic chiral nanotube on a Si/SiO2 surface.

Structural (n,m) determination of isolated single wall carbon nanotubes by resonant Raman scattering

Carbon nanotubes possess unique properties that make them potentially useful in many applications in optoelectronics. This review describes the fundamental optical behaviour of carbon nanotubes as well as their opportunities for light generation and detection, and photovoltaic energy generation.

Carbon-nanotube photonics and optoelectronics

Silicon nanowire-based solar cells on metal foil are described. The key benefits of such devices are discussed, followed by optical reflectance, current-voltage, and external quantum efficiency data for a cell design employing a thin amorphous silicon layer deposited on the nanowire array to form the p-n junction. A promising current density of ∼1.6mA∕cm2 for 1.8cm2 cells was obtained, and a broad external quantum efficiency was measured with a maximum value of ∼12% at 690nm. The optical reflectance of the silicon nanowire solar cells is reduced by one to two orders of magnitude compared to planar cells.

Silicon nanowire solar cells

Light management is of great importance in photovoltaic cells, as it determines the fraction of incident light entering the device. An optimal p–n junction combined with optimal light absorption can lead to a solar cell efficiency above the Shockley–Queisser limit. Here, we show how this is possible by studying photocurrent generation for a single core–shell p–i–n junction GaAs nanowire solar cell grown on a silicon substrate. At 1 sun illumination, a short-circuit current of 180 mA cm –2 is obtained, which is more than one order of magnitude higher than that predicted from the Lambert–Beer law. The enhanced light absorption is shown to be due to a light-concentrating property of the standing nanowire, as shown by photocurrent maps of the device. The results imply new limits for the maximum efficiency obtainable with III–V based nanowire solar cells under 1 sun illumination.

/pdf/single-nanowire-solar-cells-beyond-the-shockley-queisser-200ib66540.pdf

Single-nanowire solar cells beyond the Shockley-Queisser limit

The broadband optical absorption properties of silicon nanowire (SiNW) films fabricated on glass substrates by wet etching and chemical vapor deposition (CVD) have been measured and found to be higher than solid thin films of equivalent thickness. The observed behavior is adequately explained by light scattering and light trapping though some of the observed absorption is due to a high density of surface states in the nanowires films, as evidenced by the partial reduction in high residual sub-bandgap absorption after hydrogen passivation. Finite difference time domain simulations show strong resonance within and between the nanowires in a vertically oriented array and describe the experimental absorption data well. These structures may be of interest in optical films and optoelectronic device applications.

Strong broadband optical absorption in silicon nanowire films

A molded article suitable for direct application of a reflective metal coating includes an amorphous thermoplastic or thermoplastic blend having a glass transition temperature greater than about 170° C. and at least one thermally stable colorant that contributes to the article's dark appearance. The article has excellent dimensional stability, and the surface to which a metal coating can be applied exhibits low gloss. Application of a metal coating to the molded article produces a metalized surface with high total reflectivity, low diffuse reflectivity, and low haze. Compositions and methods for forming the article are described.

Dark colored thermoplastic compositions, articles molded therefrom, and article preparation methods

The authors show that a carbon nanotube p-n diode is a very sensitive probe of optical transitions in individual single-walled carbon nanotubes. In the photocurrent spectra, an alternating sequence of resonant peaks from dissociation of excitons and exciton-phonon bound states, for the lowest and higher electronic subbands, is observed. At an intermediate energy, the onset of continuum is observed that allows measurement of exciton binding energies. Both the binding energy and the onset of continuum follow the inverse diameter relation as expected from general theory of optical transitions in nanotubes.

Direct probe of excitonic and continuum transitions in the photocurrent spectroscopy of individual carbon nanotube p-n diodes

Embodiments of the invention include a system for sensing homonuclear diatomic molecules, such as, for example, nitrogen. Other embodiments include a method for sensing homonuclear diatomic molecules. The system may include a light source, a hollow-core wave-guiding device that exhibits a low attenuation at predetermined operating optical frequencies and is in optical communication with the light source, a gas introduction system for introducing a gaseous medium between the light source and the hollow-core wave-guiding device, and a detector in optical communication with the hollow-core wave-guiding device.

Hollow-core waveguide-based raman systems and methods

A method for determining analyte concentration levels is provided. The method includes acquiring radiation scattered off or transmitted by a target, analyzing at least a first portion of the radiation via a first technique to generate a first measurement of analyte concentration levels, and analyzing at least a second portion of the radiation via a second technique to generate a second measurement of analyte concentration levels. The method further determines analyte concentration levels based on at least one of the first measurement or the second measurement. In addition, a system for implementing the method and a probe for measuring and monitoring the analyte concentration levels is provided.

Peter J. Codella

Papers

Strong broadband optical absorption in silicon nanowire films

Dark colored thermoplastic compositions, articles molded therefrom, and article preparation methods

Direct probe of excitonic and continuum transitions in the photocurrent spectroscopy of individual carbon nanotube p-n diodes

Hollow-core waveguide-based raman systems and methods

System and method for non-invasive glucose monitoring