Many materials systems are currently under consideration as potential replacements for SiO2 as the gate dielectric material for sub-0.1 μm complementary metal–oxide–semiconductor (CMOS) technology. A systematic consideration of the required properties of gate dielectrics indicates that the key guidelines for selecting an alternative gate dielectric are (a) permittivity, band gap, and band alignment to silicon, (b) thermodynamic stability, (c) film morphology, (d) interface quality, (e) compatibility with the current or expected materials to be used in processing for CMOS devices, (f) process compatibility, and (g) reliability. Many dielectrics appear favorable in some of these areas, but very few materials are promising with respect to all of these guidelines. A review of current work and literature in the area of alternate gate dielectrics is given. Based on reported results and fundamental considerations, the pseudobinary materials systems offer large flexibility and show the most promise toward success...

/pdf/high-k-gate-dielectrics-current-status-and-materials-zjvba0c4u8.pdf

High-κ gate dielectrics: Current status and materials properties considerations

Nanocrystals (NCs) discussed in this Review are tiny crystals of metals, semiconductors, and magnetic material consisting of hundreds to a few thousand atoms each. Their size ranges from 2-3 to about 20 nm. What is special about this size regime that placed NCs among the hottest research topics of the last decades? The quantum mechanical coupling * To whom correspondence should be addressed. E-mail: dvtalapin@uchicago.edu. † The University of Chicago. ‡ Argonne National Lab. Chem. Rev. 2010, 110, 389–458 389

/pdf/prospects-of-colloidal-nanocrystals-for-electronic-and-3dxpyhl3r7.pdf

Prospects of Colloidal Nanocrystals for Electronic and Optoelectronic Applications

Learn the basic properties and designs of modern VLSI devices, as well as the factors affecting performance, with this thoroughly updated second edition. The first edition has been widely adopted as a standard textbook in microelectronics in many major US universities and worldwide. The internationally-renowned authors highlight the intricate interdependencies and subtle tradeoffs between various practically important device parameters, and also provide an in-depth discussion of device scaling and scaling limits of CMOS and bipolar devices. Equations and parameters provided are checked continuously against the reality of silicon data, making the book equally useful in practical transistor design and in the classroom. Every chapter has been updated to include the latest developments, such as MOSFET scale length theory, high-field transport model, and SiGe-base bipolar devices.

/pdf/fundamentals-of-modern-vlsi-devices-471xd7l9pf.pdf

Fundamentals of Modern VLSI Devices

The compelling demand for higher performance and lower power consumption in electronic systems is the main driving force of the electronics industry's quest for devices and/or architectures based on new materials. Here, we provide a review of electronic devices based on two-dimensional materials, outlining their potential as a technological option beyond scaled complementary metal-oxide-semiconductor switches. We focus on the performance limits and advantages of these materials and associated technologies, when exploited for both digital and analog applications, focusing on the main figures of merit needed to meet industry requirements. We also discuss the use of two-dimensional materials as an enabling factor for flexible electronics and provide our perspectives on future developments.

Electronics based on two-dimensional materials

Wide-band-gap oxides such as SrTiO3 are shown to be critical tests of theories of Schottky barrier heights based on metal-induced gap states and charge neutrality levels. This theory is reviewed and used to calculate the Schottky barrier heights and band offsets for many important high dielectric constant oxides on Pt and Si. Good agreement with experiment is found for barrier heights. The band offsets for electrons on Si are found to be small for many key oxides such as SrTiO3 and Ta2O5 which limit their utility as gate oxides in future silicon field effect transistors. The calculations are extended to screen other proposed oxides such as BaZrO3. ZrO2, HfO2, La2O3, Y2O3, HfSiO4, and ZrSiO4. Predictions are also given for barrier heights of the ferroelectric oxides Pb1−xZrxTiO3 and SrBi2Ta2O9 which are used in nonvolatile memories.

Band offsets of wide-band-gap oxides and implications for future electronic devices

MOSFETs with gate length down to 17 nm are reported To suppress the short channel effect, a novel self-aligned double-gate MOSFET, FinFET, is proposed By using boron-doped Si/sub 04/Ge/sub 06/ as a gate material, the desired threshold voltage was achieved for the ultrathin body device The quasiplanar nature of this new variant of the vertical double-gate MOSFETs can be fabricated relatively easily using the conventional planar MOSFET process technologies

FinFET-a self-aligned double-gate MOSFET scalable to 20 nm

While the selection of new "backbone" device structure in the era of post-planar CMOS is open to a few candidates, FinFET and its variants show great potential in scalability and manufacturability for nanoscale CMOS In this paper we report the design, fabrication, performance, and integration issues of double-gate FinFETs with the physical gate length being aggressively shrunk down to 10 nm and the fin width down to 12 nm These MOSFETs are believed to be the smallest double-gate transistors ever fabricated Excellent short-channel performance is observed in devices with a wide range of gate lengths (10/spl sim/105 nm) The observed short-channel behavior outperforms any reported single-gate silicon MOSFETs Due to the [110] channel crystal orientation, hole mobility in the fabricated p-channel FinFET exceeds greatly that in a traditional planar MOSFET At 105 nm gate length, the p-channel FinFET shows a record-high transconductance of 633 /spl mu/S//spl mu/m at a V/sub dd/ of 12 V Working CMOS FinFET inverters are also demonstrated

/pdf/finfet-scaling-to-10-nm-gate-length-2bejw0rpgu.pdf

FinFET scaling to 10 nm gate length

High performance PMOSFETs with gate length as short as 18-nm are reported. A self-aligned double-gate MOSFET structure (FinFET) is used to suppress the short channel effect. A 45 nm gate-length PMOS FinEET has an I/sub dsat/ of 410 /spl mu/A//spl mu/m (or 820 /spl mu/A//spl mu/m depending on the definition of the width of a double-gate device) at Vd=Vg=1.2 V and Tox=2.5 nm. The quasi-planar nature of this variant of the double-gate MOSFETs makes device fabrication relatively easy using the conventional planar MOSFET process technologies. Simulation shows possible scaling to 10-nm gate length.

Sub 50-nm FinFET: PMOS

A FinFET device is fabricated using conventional planar MOSFET technology. The device is fabricated in a silicon layer overlying an insulating layer (e.g., SIMOX) with the device extending from the insulating layer as a fin. Double gates are provided over the sides of the channel to provide enhanced drive current and effectively suppress short channel effects. A plurality of channels can be provided between a source and a drain for increased current capacity. In one embodiment two transistors can be stacked in a fin to provide a CMOS transistor pair having a shared gate.

Finfet transistor structures having a double gate channel extending vertically from a substrate and methods of manufacture

High-performance PMOSFETs with sub-50-nm gate-length are reported. A self-aligned double-gate MOSFET structure (FinFET) is used to suppress the short-channel effects. This vertical double-gate SOI MOSFET features: 1) a transistor channel which is formed on the vertical surfaces of an ultrathin Si fin and controlled by gate electrodes formed on both sides of the fin; 2) two gates which are self-aligned to each other and to the source/drain (S/D) regions; 3) raised S/D regions; and 4) a short (50 nm) Si fin to maintain quasi-planar topology for ease of fabrication. The 45-nm gate-length p-channel FinFET showed an I/sub dsat/ of 820 /spl mu/A//spl mu/m at V/sub ds/=V/sub gs/=1.2 V and T/sub ox/=2.5 mm. Devices showed good performance down to a gate-length of 18 nm. Excellent short-channel behavior was observed. The fin thickness (corresponding to twice the body thickness) is found to be critical for suppressing the short-channel effects. Simulations indicate that the FinFET structure can work down to 10 nm gate length. Thus, the FinFET is a very promising structure for scaling CMOS beyond 50 nm.

Tsu-Jae King

Papers

FinFET-a self-aligned double-gate MOSFET scalable to 20 nm

FinFET scaling to 10 nm gate length

Sub 50-nm FinFET: PMOS

Finfet transistor structures having a double gate channel extending vertically from a substrate and methods of manufacture

Sub-50 nm P-channel FinFET